Abstract:Over-the-air (OTA) testing and electromagnetic compatibility (EMC) measurements are widely performed in classical reverberation chambers. A less-known reverberation chamber, yet a considerably efficient environment for generating multipath conditions, is the vibrating intrinsic reverberation chamber (VIRC). This article thoroughly investigates the radio propagation channel inside the VIRC. The specific channels studied are narrowband single-input single-output (SISO) systems operating in the frequency range from 670–2740 MHz. A relevant application is OTA testing wireless baseband algorithms or modems for wireless sensor networks, specifically low-power wide-area networks such as Narrowband-IoT (NB-IoT), Long Range (LoRa) and Ultra-Narrowband (UNB). The focus is on the first- and second-order temporal and spectral channel characteristics: coherence time, Doppler spectrum, Doppler spread, frequency autocovariance function, coherence bandwidth, rejection rate of chi-squared goodness-of-fit test for Rician distribution, Rician -factor, and channel gain. Besides the impact of the frequency of operation, the investigation considers the effect of the rotational speed of the VIRC motors, two loading conditions, on the channel characteristics. An analysis of the measurement results shows that the stirring efficiency degrades while the coherence time increases at slow rotational speeds, with loading, and/or at low frequencies. Moreover, empirical models closely fitting the behavior of various investigated characteristics are proposed, for which we provide foundational physical interpretations. A further investigation is carried out to demonstrate the generality and briefly illustrate the potential usability of these models for both EMC and OTA testing.

Estimation of Average Rician K-Factor and Average Mode Bandwidth in Loaded Reverberation Chamber

Estimation of Average Rician K-factor in Reverberation Chamber

An Effective Parameter to Characterize the Rician Channel in Hybrid Stirred Reverberation Chamber

Relations Between Coherence Bandwidth and Average Mode Bandwidth in Reverberation Chamber for Wireless Device Measurement

Channel Sounding of Loaded Reverberation Chamber for Over-the-Air Testing of Wireless Devices: Coherence Bandwidth Versus Average Mode Bandwidth and Delay Spread

Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty Formula

Average Rician K-Factor-Based Uncertainty Model of Measured Antenna Efficiency Using the Reference Antenna Method in Reverberation Chambers

Verification of the Rician K-Factor-Based Uncertainty Model for Measurements in Reverberation Chambers

Direct coupling as a residual error contribution during OTA measurements of wireless devices in reverberation chamber

Effects of the Unstirred Power on the Three-Antenna Efficiency Measurements in a Reverberation Chamber

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Overview of State-of-the-art OTA Measurements of Wireless Devices in Reverberation Chamber

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

K-factor Evaluation in a Hybrid Reverberation Chamber plus CATR OTA Testing Setup

Angular Spectrum for Wireless Over-the-Air Measurements in the Loaded Reverberation Chamber

Frequency Stirring Effects on Reference Antenna Efficiency Measurements in Reverberation Chambers

Statistical Analysis of Antenna Efficiency Measurements with Non-Reference Antenna Methods in a Reverberation Chamber.

On Statistics of the Measured Antenna Efficiency in a Reverberation Chamber

Empirical Characterization and Modeling of the Propagation Channel Inside the VIRC

Probability Distribution of the Coherence Bandwidth of a Reverberation Chamber

Generalized Statistics of Antenna Efficiency Measurement in a Reverberation Chamber