Abstract:Over-the-air (OTA) testing and electromagnetic compatibility (EMC) measurements are widely performed in classical reverberation chambers. A less-known reverberation chamber, yet a considerably efficient environment for generating multipath conditions, is the vibrating intrinsic reverberation chamber (VIRC). This article thoroughly investigates the radio propagation channel inside the VIRC. The specific channels studied are narrowband single-input single-output (SISO) systems operating in the frequency range from 670–2740 MHz. A relevant application is OTA testing wireless baseband algorithms or modems for wireless sensor networks, specifically low-power wide-area networks such as Narrowband-IoT (NB-IoT), Long Range (LoRa) and Ultra-Narrowband (UNB). The focus is on the first- and second-order temporal and spectral channel characteristics: coherence time, Doppler spectrum, Doppler spread, frequency autocovariance function, coherence bandwidth, rejection rate of chi-squared goodness-of-fit test for Rician distribution, Rician -factor, and channel gain. Besides the impact of the frequency of operation, the investigation considers the effect of the rotational speed of the VIRC motors, two loading conditions, on the channel characteristics. An analysis of the measurement results shows that the stirring efficiency degrades while the coherence time increases at slow rotational speeds, with loading, and/or at low frequencies. Moreover, empirical models closely fitting the behavior of various investigated characteristics are proposed, for which we provide foundational physical interpretations. A further investigation is carried out to demonstrate the generality and briefly illustrate the potential usability of these models for both EMC and OTA testing.

Reverberation Chambers for Over-the-Air Tests: an Overview of Two Decades of Research

A Review of Over-the-Air Testing Methods for Performance Measurement of Antennas and Devices in Communication Systems

Base station over-the-air testing in reverberation chamber

Calibration Test of Reverberation Chamber

Empirical Characterization and Modeling of the Propagation Channel Inside the VIRC

Technology of the Reverberation Chamber for EMC Test

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

An Efficient Total Radiated Power Test Method Based on Optimal Interpolation over a Sphere of Large Antenna Array

Key issues and algorithms of multiple-input-multiple-output over-the-air testing in the multi-probe anechoic chamber setup

Testing Investigation of Antenna Calibration Factor and Insertion Loss of a Reverberation Chamber

A Reverberation Chamber for Antenna Measurements up to 140 GHz

An Improved Method for Reconstructing Antenna Radiation Pattern in a Loaded Reverberation Chamber

A Fast Technique to Evaluate Uniformity Conformity to Standards' Requirement for a Reverberation Chamber at the Low End of Test Frequency

Switchable Metasurface Absorber Used for Enabling Reconfigurable Power Angular Spectrum in Reverberation Chamber

A Novel Mode-Stirred Reverberation Chamber Design for 5G Millimeter Wave Bands

Comparison on the Test Results Between Reverberation Chamber and Anechoic Chamber

Empirical Study of Angular-Temporal Spectra in a Reverberation Chamber

Statistical Analysis of Antenna Efficiency Measurements with Non-Reference Antenna Methods in a Reverberation Chamber.

Evaluation Of Test Reproducibility Of Calibration In Reverberation Chamber

Evaluation Of Transmit Antenna Position In Reverberation Chamber

Measurement of the Quiet Zone Performance of Microwave Anechoic Chamber