Abstract:In order to surmount the Shockley–Queisser efficiency barrier of single-junction solar devices, tandem solar cells (TSCs) have shown a potential solution. Organic and Si materials can be promising candidates for the front and rear cells in TSCs due to their non-toxicity, cost-effectiveness, and possible complementary bandgap properties. This study researches a flexible two-terminal (2-T) organic/Si TSC through TCAD simulation. In the proposed configuration, the organic solar cell (OSC), with a photoactive optical bandgap of 1.78 eV, serves as the front cell, while the rear cell comprises a Si cell based on a thin 70 μm wafer, with a bandgap energy of 1.12 eV. The individual standalone front and bottom cells, upon calibration, demonstrate power conversion efficiencies (PCEs) of 11.11% and 22.69%, respectively. When integrated into a 2-T organic/Si monolithic TSC, the resultant tandem cell achieves a PCE of 20.03%, indicating the need for optimization of the top organic cell to beat the efficiency of the bottom Si cell. To enhance the performance of the OSC, some design ideas are presented. Firstly, the OSC is designed by omitting the organic hole transport layer (HTL). Consequently, through engineering the front contact work function, the PCE is enhanced. Moreover, the influence of varying the absorber defect density of the top cell on TSC performance is investigated. Reduced defect density led to an overall efficiency improvement of the tandem cell to 23.27%. Additionally, the effects of the variation of the absorber thicknesses of the top and rear cells on TSC performance metrics are explored. With the matching condition design, the tandem efficiency is enhanced to 27.60%, with VOC = 1.81 V and JSC = 19.28 mA/cm2. The presented simulation results intimate that the OSC/Si tandem design can find applications in wearable electronics due to their flexibility, environmentally friendly design, and high efficiency.

Enhanced Open-Circuit Voltage in Tandem Polymer Solar Cell

Toward high-efficiency solution-processed tandem solar cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Novel Polymer-Based Organic/c-Si Monolithic Tandem Solar Cell: Enhanced Efficiency using Interlayer and Transparent Top Electrode Engineering

Nonfullerene Tandem Organic Solar Cells with High Open‐Circuit Voltage of 1.97 V

Enhanced optoelectronic coupling for perovskite-silicon tandem solar cells

Tandem Organic Solar Cell with 20.2% Efficiency

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub‐Cell

Enhanced optical path and electron diffusion length enable high-efficiency perovskite tandems

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Achieving High Performance Tandem Polymer Solar Cells

Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells

High Performance Thermal-Treatment-free Tandem Polymer Solar Cells with High Fill Factors

TCAD-Based Design and Optimization of Flexible Organic/Si Tandem Solar Cells