Abstract:Low energy loss and efficient charge separation under small driving forces are the prerequisites for realizing high power conversion efficiency (PCE) in organic photovoltaics (OPVs). Here, a new molecular design of nonfullerene acceptors (NFAs) is proposed to address above two issues simultaneously by introducing asymmetric terminals. Two NFAs, BTP-S1 and BTP-S2, are constructed by introducing halogenated indandione (A1 ) and 3-dicyanomethylene-1-indanone (A2 ) as two different conjugated terminals on the central fused core (D), wherein they share the same backbone as well-known NFA Y6, but at different terminals. Such asymmetric NFAs with A1 -D-A2 structure exhibit superior photovoltaic properties when blended with polymer donor PM6. Energy loss analysis reveals that asymmetric molecule BTP-S2 with six chlorine atoms attached at the terminals enables the corresponding devices to give an outstanding electroluminescence quantum efficiency of 2.3 × 10-2 %, one order of magnitude higher than devices based on symmetric Y6 (4.4 × 10-3 %), thus significantly lowering the nonradiative loss and energy loss of the corresponding devices. Besides, asymmetric BTP-S1 and BTP-S2 with multiple halogen atoms at the terminals exhibit fast hole transfer to the donor PM6. As a result, OPVs based on the PM6:BTP-S2 blend realize a PCE of 16.37%, higher than that (15.79%) of PM6:Y6-based OPVs. A further optimization of the ternary blend (PM6:Y6:BTP-S2) results in a best PCE of 17.43%, which is among the highest efficiencies for single-junction OPVs. This work provides an effective approach to simultaneously lower the energy loss and promote the charge separation of OPVs by molecular design strategy.

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Enabling High‐Performance Tandem Organic Photovoltaic Cells by Balancing the Front and Rear Subcells

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Tandem Organic Solar Cells with Efficiency over 19% Via the Careful Subcell Design and Optimization

Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%

Tandem organic solar cells with 18.67% efficiency <i>via</i> careful subcell design and selection

High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells

Tandem organic solar cells with efficiency over 19

Asymmetric Electron Acceptors for High‐Efficiency and Low‐Energy‐Loss Organic Photovoltaics

15% Efficiency Tandem Organic Solar Cell Based on a Novel Highly Efficient Wide‐Bandgap Nonfullerene Acceptor with Low Energy Loss

Constructing High‐Performance Organic Photovoltaics Via Emerging Non‐Fullerene Acceptors and Tandem‐Junction Structure

Efficient Monolithic Perovskite/organic Tandem Solar Cells and Their Efficiency Potential

Boosting the Efficiency of Perovskite/Organic Tandem Solar Cells via Enhanced Near‐Infrared Absorption and Minimized Energy Losses

Tandem organic solar cells with 18.67% efficiency via the careful subcell design and selection

Novel wide-bandgap non-fullerene acceptors for efficient tandem organic solar cells

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

High Efficiency Organic/A-Si Hybrid Tandem Solar Cells with Complementary Light Absorption

Highly Efficient Tandem Organic Solar Cell Enabled by Environmentally Friendly Solvent Processed Polymeric Interconnecting Layer

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub‐Cell