Abstract:This work developshighly efficient perovskite/organic tandem solar cells (POTSC) via the simultaneous optimization of quaternary organic BHJ blend, and reduction of optical and electrical losses of interconnecting layers via self‐assembly monolayer. The resultant POTSCs achieve a remarkable power conversion efficiency (PCE) of 25.56% (certified: 24.65%), with a record fill factor (FF) of 83.62% of all types of perovskite‐based tandem solar cells (TSCs) till now. Perovskite/organic tandem solar cells (POTSCs) have garnered significant attention due to their potential for achieving high photovoltaic (PV) performance. However, the reported power conversion efficiencies (PCEs) and fill factors (FFs) are still subpar due to the challenges associated with charge extraction in the organic bulk‐heterojunction (BHJ) and significant energy losses in the interconnecting layers (ICLs). Here, a quaternary organic BHJ blend is developed to enhance the charge extraction in the organic subcell, contributing to an increased FF of ≥78% under 1 sun illumination and even more under lower illumination intensities. Meanwhile, energy losses in the ICLs are reduced via the incorporation of a self‐assembly monolayer (SAM), (4‐(3,6‐Dimethyl‐9H‐carbazol‐9‐yl)butyl)phosphonic acid (Me‐4PACz), in organic BHJ to form a MoOx/SAM interface and the thorough control of the MoOx thickness to suppress parasitic absorption. The resultant POTSCs achieve a remarkable PCE of 25.56% (certified: 24.65%), with a record FF of 83.62%, which is among the highest PCEs of POTSCs and the highest FF of all types of perovskite‐based tandem solar cells (TSCs) till now. This work proves the optimization of charge extraction and ICLs are effective strategies to promote the performance of POTSCs to surpass other solution‐processed perovskite‐based TSCs in the near future.

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub‐Cell

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Efficient Organic Tandem Solar Cells Enabled by Solution‐Processed Interconnection Layer and Fine‐Tuned Active Layer

Over 17.7% efficiency ternary-blend organic solar cells with low energy-loss and good thickness-tolerance

Tandem Organic Solar Cell with 20.2% Efficiency

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells

Enabling High‐Performance Tandem Organic Photovoltaic Cells by Balancing the Front and Rear Subcells

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

An efficient solution‐processed interconnecting layer for large‐area tandem organic solar cells

Surface Reconstruction for Stable Monolithic All‐Inorganic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency

Transparent Recombination Electrode with Dual‐Functional Transport and Protective Layer for Efficient and Stable Monolithic Perovskite/Organic Tandem Solar Cells

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses

Boosting the Efficiency of Perovskite/Organic Tandem Solar Cells via Enhanced Near‐Infrared Absorption and Minimized Energy Losses

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Optimization of Charge Extraction and Interconnecting Layers for Highly Efficient Perovskite/Organic Tandem Solar Cells with High Fill Factor

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Toward Efficient Tandem Organic Solar Cells: From Materials to Device Engineering

Achieved 18.9% Efficiency by Fine‐Tuning Non‐Fullerene Acceptor Content to Simultaneously Increase the Short‐Circuit Current and Fill Factor of Organic Solar Cells

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells