Abstract:In order to surmount the Shockley–Queisser efficiency barrier of single-junction solar devices, tandem solar cells (TSCs) have shown a potential solution. Organic and Si materials can be promising candidates for the front and rear cells in TSCs due to their non-toxicity, cost-effectiveness, and possible complementary bandgap properties. This study researches a flexible two-terminal (2-T) organic/Si TSC through TCAD simulation. In the proposed configuration, the organic solar cell (OSC), with a photoactive optical bandgap of 1.78 eV, serves as the front cell, while the rear cell comprises a Si cell based on a thin 70 μm wafer, with a bandgap energy of 1.12 eV. The individual standalone front and bottom cells, upon calibration, demonstrate power conversion efficiencies (PCEs) of 11.11% and 22.69%, respectively. When integrated into a 2-T organic/Si monolithic TSC, the resultant tandem cell achieves a PCE of 20.03%, indicating the need for optimization of the top organic cell to beat the efficiency of the bottom Si cell. To enhance the performance of the OSC, some design ideas are presented. Firstly, the OSC is designed by omitting the organic hole transport layer (HTL). Consequently, through engineering the front contact work function, the PCE is enhanced. Moreover, the influence of varying the absorber defect density of the top cell on TSC performance is investigated. Reduced defect density led to an overall efficiency improvement of the tandem cell to 23.27%. Additionally, the effects of the variation of the absorber thicknesses of the top and rear cells on TSC performance metrics are explored. With the matching condition design, the tandem efficiency is enhanced to 27.60%, with VOC = 1.81 V and JSC = 19.28 mA/cm2. The presented simulation results intimate that the OSC/Si tandem design can find applications in wearable electronics due to their flexibility, environmentally friendly design, and high efficiency.

Novel Polymer-Based Organic/c-Si Monolithic Tandem Solar Cell: Enhanced Efficiency using Interlayer and Transparent Top Electrode Engineering

Toward high-efficiency solution-processed tandem solar cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Achieving High Performance Tandem Polymer Solar Cells

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Tandem Organic Solar Cell with 20.2% Efficiency

TCAD-Based Design and Optimization of Flexible Organic/Si Tandem Solar Cells

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

Polymer-based parallel tandem solar cells with a transparent ferroelectric interconnecting layer

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Optical Design of Monolithic Two-Terminal Perovskite/Si Tandem Solar Cells for Efficient Photon Management

Maximizing efficiency: Numerical modeling and optimization of 2-terminal perovskite/silicon tandem devices with different bottom cell structures

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer

Enhancing solar cell efficiency: Investigation of high-performance lead-based perovskite-on-silicon (PVK–Si) tandem solar cells through design and numerical analysis

Toward Efficient Tandem Organic Solar Cells: From Materials to Device Engineering

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Monolithic parallel tandem organic photovoltaic cell with transparent carbon nanotube interlayer

High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells

Efficient Organic Tandem Solar Cells Enabled by Solution‐Processed Interconnection Layer and Fine‐Tuned Active Layer

Oligomer-Assisted Photoactive Layers Enable >18 % Efficiency of Organic Solar Cells