Abstract:Lab-on-a-chip (LoC) technologies continue to promise lower cost and more accessible platforms for performing biomedical testing in low-cost and disposable form factors. Lab-on-CMOS or lab-on-microchip methods extend this paradigm by merging passive LoC systems with active complementary metal-oxide semiconductor (CMOS) integrated circuits (IC) to enable front-end signal conditioning and digitization immediately next to sensors in fluid channels. However, integrating ICs with microfluidics remains a challenge due to size mismatch and geometric constraints, such as non-planar wirebonds or flip-chip approaches in conflict with planar microfluidics. In this work, we present a hybrid packaging solution for IC-enabled microfluidic sensor systems. Our approach uses a combination of wafer-level molding and direct-write 3D printed interconnects, which are compatible with post-fabrication of planar dielectric and microfluidic layers. In addition, high-resolution direct-write printing can be used to rapidly fabricate electrical interconnects at a scale compatible with IC packaging without the need for fixed tooling. Two demonstration sensor-in-package systems with integrated microfluidics are shown, including measurement of electrical impedance and optical scattering to detect and size particles flowing through microfluidic channels over or adjacent to CMOS sensor and read-out ICs. The approach enables fabrication of impedance measurement electrodes less than 1 mm from the readout IC, directly on package surface. As shown, direct fluid contact with the IC surface is prevented by passivation, but long-term this approach can also enable fluid access to IC-integrated electrodes or other top-level IC features, making it broadly enabling for lab-on-CMOS applications.

Merging SoC and LOC Together

Integration of SoC and LOC

Recent Advances in Monolithic Integration of Diverse Technologies with Si CMOS

Monolithic integration of micromachined sensors and CMOS circuits based on SOI technologies

Monolithic Integration Of Micro-Cantilever With Conditioning Circuits Based On Soi Techniques

IC Simulations of the On-chip Integration for SOI CMOS and MEMS

Monolithic Integration of Micro-Cantilever and Readout Circuits

Microfluidic Lab-on-CMOS Packaging Using Wafer-Level Molding and 3D-Printed Interconnects

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Wafer-level heterogeneous integration of electrochemical devices and semiconductors for a monolithic chip

MEMS monolithic integration technology

Integrated Cell Manipulation Systems

Integrating MEMS and ICs

Inter-CMOS process for monolithic integrated MEMS resonator

CMOS MEMS: A Key Technology Towards the &#x201c;more Than Moore&#x201D; Era

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

3-D Integration and Through-Silicon Vias in MEMS and Microsensors

Nanofabrication Enabled Lab -on -a -Chip Technology for the Manipulation and Detection of Bacteria

Monolithic Integration of Multiple Sensors on a Single Silicon Chip

A Nanocore/CMOS Hybrid System-on-Package (SoP) Architecture for Future Nanoelectronic Systems

A Fully Integrated CMOS-controlled Scalable Microfluidics and Pneumatic-free Cell Actuation and Cytometry Sensing Device