Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Coupler Design and Test for X-band Hybrid Loaded Circular Waveguide Accelerator

Coupler Design For X-Band Hybrid Dielectric-Iris Loaded Accelerator

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Design and Test a Broadband Circular Waveguide Directional Coupler

DESIGN AND SIMULATION OF THE WAVEGUIDE COUPLER FOR THE CAVITY BEAM MONITOR

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

A Compact Circular Waveguide Directional Coupler for High-Order Mode Vacuum Electronic Devices

SIW 3db Directional Coupler Working in Ku-band

Model Cavity Investigations and Calculations on Hom for an X-Band Hybrid Dielectric-Iris-loaded Accelerating Structure

Design and Measurement of a Nonlinear-Curve Directional Coupler for Sheet Beam Traveling Wave Tube

Design of coaxial-line loop exciting circular waveguide coupler

Physical Calculation for an X -Band Hybrid Dielectric-Iris-loaded Accelerator

Coupler Conditioning and High Power Testing of ADS Spoke Cavity

Design and Experimental Measurement of Input and Output Couplers for a 6-18-GHz High-Power Helix Traveling Wave Tube Amplifier

The study and design of RF coupler for Chinese ADS HWR Superconducting Cavity

Design Of Input And Output Couplers Of 18-40ghz Millimeter-Wave Traveling-Wave Tube

Rigorous Analysis Of Wide-Band Directional Coupler Using I -Shape Dielectric Waveguide

A Novel Design Of Ku Band Coaxial - Waveguide Directional Coupler Used For The Measurement Of The Short-Circuited Line Method

Rectangular Waveguide Coupler with Adjustable Coupling Coefficient Using Gap Waveguide Technology