Abstract:PurposeIn order to achieve a high-precision measurement of the incident and the reflected power, a WR1800 rectangular waveguide directional coupler with high directivity and high power level has been in-house developed. Multiple couplers will be installed in the 500-MHz high-power radio-frequency transmission lines delivering 200-kW continuous-wave power for the High Energy Photon Source (HEPS).MethodsThe directional coupler adopts the design scheme of primary and secondary transmission lines and coaxial coupling-head structure. The shape and dimensional parameters of the coupling head were carefully optimized by using microwave simulation codes. An optimum directivity of 64 dB was achieved in simulations.Results and conclusionsA prototype coupler was subsequently manufactured, and its directivity was measured to be 48.2 dB following a rigorous calibration procedure, largely exceeding the design goal and the commercial product. The coupler was then connected to an existing 500-MHz klystron system, and a high-power test with short-circuit termination was conducted. The high directivity of the coupler was confirmed up to 200 kW. During the 6 hours of power aging with continuous-wave 200 kW in a standing-wave setup, no performance degradation was observed on the coupler. The coupler temperature was measured to be 20 ∘documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$^{circ }$$end{document}C above the ambient environment. The design requirements were comfortably fulfilled. These constitute the first in-house development of a large-size waveguide directional coupler with high directivity and high power level for HEPS. The design, fabrication, and performance tests of the directional coupler are presented.

Design Of Input And Output Couplers Of 18-40ghz Millimeter-Wave Traveling-Wave Tube

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Design of the Coupler for Millimeter-Wave Space TWT

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design and Fabrication of the Star Coupler Based on SOI Material

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

The study and design of RF coupler for Chinese ADS HWR Superconducting Cavity

GaAs/GaAlAs traveling-wave directional coupler optical modulators: I. design

Design and Simualtion of a Ku-band Input Coupling Structure TE10□ → TE11○ for Gyro-Twt

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Study on a Broadband Input Power Coupler Component for the W band TE02 mode Gyro-TWT

Design of high-power small-size directional coupler

Simulation Studies on W-Band Traveling-Wave Tube with Double Rectangular Comb Slow-Wave Structure

Design and Manufacture of Coaxial Symmetric Input Coupler

Branch Waveguide Couplers with a frequency of 510 GHz for Terahertz Transmit/Receive Isolation Applications

A Compact Circular Waveguide Directional Coupler for High-Order Mode Vacuum Electronic Devices

Design and Implementation of Broadband Hybrid 3-dB Couplers with Silicon-Based IPD Technology

Fusion design of six-port waveguide coupler integrating tight and loose coupling

Development of a 500-MHz waveguide directional coupler with high directivity for HEPS