Abstract:Wind power systems, which are currently being constructed for the electricity worldwide market, are mostly based on Doubly Fed Induction Generators (DFIGs). To control such systems, multilevel converters are increasingly preferred due to the well-known benefits they provide. This paper deals with the control of a standalone DFIG-based Wind Energy Conversion System (WECS) by using a three-level Neutral-Point-Clamped (NPC) converter. The frequency and magnitude of the stator output voltage of the DFIG are controlled and fixed at nominal values despite the variable rotor speed, ensuring a continuous AC supply for three-phase loads. This task is achieved by controlling the DFIG rotor currents via a PI controller combined with a new Simplified Direct Space Vector Modulation strategy (SDSVM), which is applied to the three-level NPC converter. This strategy is based on the use of a line-to-line three-level converter space vector diagram without using Park transformation and then simplifying it to that of a two-level converter. The performance of the proposed SDSVM technique in terms of controlling the three-level NPC-converter-based standalone WECS is demonstrated through simulation results. The whole WECS control and the SDSVM strategy are implemented on a dSPACE DS 1104 board that drives a DFIG-based wind system test bench. The obtained experimental results confirm the validity and performance in terms of control.

Design and Comparison of Full-Size Converters for Large Variable-Speed Wind Turbines

Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy Systems

A High Efficiency High Power Step-Up Resonant Switched-Capacitor Converter for Offshore Wind Energy Systems

Design of High-efficiency Converters for Large Direct-drive Wind Turbines

5L Full-Scale Converter with a Dc-Link Flying-Capacitor Auxiliary Bridge Leg for Large Direct-Drive Wind Turbines

Transformer-less Five-Level High-Voltage Full-Scale Converter with a Self-Balance Auxiliary Circuit for 10MW Wind Turbines

Multilevel converters for 10 MW Wind Turbines

Power Converter Technologies for 20MW Wind Turbines

A Four-Leg Three-Level Neutral-Point-Clamped Inverter for Offshore Wind Turbine with Vsc-Based Hvdc Transmission

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

Simulation Research of Offshore Wind Farm VSC-HVDC Three-Level Converters for Grid Integration

Multi-Objective Optimization and Comparison of DC/DC Converters for Offshore Wind Turbines

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Medium-Voltage Wind Power Converter Based on Three-Level Neutral Point Clamped Topology

A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Comparison of Multi-Mw Converters Considering the Determining Factors in Wind Power Application

Full Converter Control for Variable-Speed Wind Turbines Without Integral Controller or PLL

A New Power Conversion System for Megawatt PMSG Wind Turbines Using Four-Level Converters and a Simple Control Scheme Based on Two-Step Model Predictive Strategy—Part I: Modeling and Theoretical Analysis

Two Novel Hybrid-Clamped Multilevel Converters for Medium-Voltage Direct-Driven Wind Turbines

A Novel Multi-level Medium Voltage Converter Designed for Medium Voltage Wind Power Generation System

A Three-Level Neutral-Point-Clamped Converter Based Standalone Wind Energy Conversion System Controlled with a New Simplified Line-to-Line Space Vector Modulation