Abstract:High-frequency grid-tied inverters in vehicle-to-grid (V2G) systems often produce lots of high-frequency harmonics and electromagnetic interference (EMI) noise. Therefore, a filtering module, which consists of a harmonic filter and an additional EMI choke, is typically required to effectively restrain the aforementioned noises, but this passive module will inevitably raise size and cost of the converter, which goes against high-power density demand of electric vehicles (EVs). To address this issue without impairing the filter’s performance, this article proposes a decoupled electromagnetically integrated structure of a symmetrical LCL -EMI filter for grid-tied converters in V2G applications. EE-shape magnetic core and flexible multilayer foil (FMLF) technique are employed in the integration design, the FMLF windings for achieving a symmetrical LCL filter are wound on side limbs of the EE core, and the EMI choke windings are arranged on the central limb. The used proper terminal configuration of the windings can almost realize function-decoupling between the LCL unit and EMI choke. Moreover, magnetic decoupling can be achieved between converter- and grid-side inductors of the LCL unit through air-gap design in the EE core’s side limbs, which can preserve the LCL unit’s satisfactory harmonic attenuation performance. Performance analysis and design principles of the integrated module are introduced, and the experimental results from a 1-kW SiC-MOSFET high-frequency grid-tied converter confirm the feasibility and validity of the approach.

LCL-RL Filter Design for the Medium-Voltage Wind Energy Conversion System Based on Dual Modules Parallel Using PS-SVPWM

A High Efficiency High Power Step-Up Resonant Switched-Capacitor Converter for Offshore Wind Energy Systems

Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy Systems

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

Harmonics Performance and System Stability Evaluation Between 18-Pulse and LCL Filter Based Active Front End Converters under Weak Grid Condition

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

LCL Filter Research and Design in Active Power Quality Controller

Study and Design of Grid Connected Inverter for 2 MW Wind Turbine

Robust Design of LCL-filters for Active Damping in Grid Converters

Electromagnetic Integration of Decoupled LCL-Filter for Grid-Tied Converters with FMLF Technique

Robust Active Damping Control for LCL-Type Shunt Active Power Filters

Reconsideration of Grid-Friendly Low-Order Filter Enabled by Parallel Converters

An LCCL Filter for a Half-Bridge Active Power Filter

Research on LCL filter applied to shunt active power filter

LCL resonant current depression control strategy against pulse width modulated harmonic voltage under low switching frequency

A Novel LCL Filter Parameter Design Method Basing on Resonant Frequency Optimization of Three-Level NPC Grid Connected Inverter

A High Performance Grid Interfacing Power Conversion System for Renewable Power Generation Applications

A Low-Pass Virtual Filter for Output Power Smoothing of Wind Energy Conversion Systems

An Electromagnetically Integrated LCL-EMI Filter for V2G Power Converters: Topology, Analysis, and Implementation

An Effective DPWM Realization Method to Suppress the CM Resonance for MLCL-Filtered Grid-Connected PV Inverters

Double Resonant Output Filter to Eliminating the Tradeoff Between Bandwidth and Switching Ripple in Shunt Active Power Filters