Abstract:This paper proposes a novel method for the modulation and fabrication of an aspherical microlens from a photocurable polymer for use in optical pickup heads. This novel modulation method can be employed not only to dynamically control the focal length and morphology of the microlens but also to fabricate aspherical lenses after UV curing of the photosensitive polymer. Forces in two dimensions provided by electrowetting and gradient electrostatic forces are applied to shape the polymer liquid from a hemispherical shape into a parabolic or a near- conical shape. Aspherical microlenses are designed based on constant optical-path-length theory and self-aligned by surface- tension forces. For morphology modulation, 2-D voltages are applied at the lower electrodes and between the upper and lower substrates, respectively, on a SU-8 spherical liquid-polymer droplet. The voltage applied at the lower electrodes provides an electrowetting effect on the polymer droplets, thereby reducing the contact angle of the spherical droplet, resulting in a desirable droplet height/baseline ratio for a desirable focal length. The voltage applied between the upper and lower substrates pulls up the droplet mostly at its center portion to form an aspherical shape that is close to a parabolic shape or even a conical shape. As a result, the Strehl ratio of the lens can be varied from 0.0076, as with a spherical shape, to 0.8362, as with a near-parabolic shape, and the focal-spot size can be reduced from 2.302 to 0.778 mum. The proposed method has been successfully implemented and has proven suitable for optical applications in which millimeter-diameter-size lenses with numerical apertures higher than 0.66 and focus-spot resolutions better than 0.8 mum are preferred.

Modify 2d Gradient-Electrostatic-Forces to Manipulate Micro-Aspherical Lens for Small Form Factor Dvd Pickup Head

Electrostatic-Force-Modulated Microaspherical Lens for Optical Pickup Head

Micro Aspheric Glass Lens Molding Process

A novel optical design for car-camera lenses

Ultra-Wide Car Lens Optimization Based on Low-Tg Aspheric Glass

Tunable micro-aspherical lens manipulated by 2D electrostatic forces

Design of three-focus single objective lens used in DVD pick-up head

Fabrication Of Aspherical Liquid Lens Controlled By Electrostatic Force

Design and Fabrication of A Copolymer Aspheric Bi-Convex Lens Utilizing Thermal Energy and Electrostatic Force in A Dynamic Fluidic

Optimum Electrostatic Force Control for Fabricating a Hybrid UV-curable Aspheric Lens

Doublet liquid variable-focus lens for spherical aberration correction

Design of Aspherical Lens for Optical Imaging System of DVD

Self-focusing 3D lithography with varying refractive index polyethylene glycol diacrylate

Fabrication and Characterization of Aspherical Lens Manipulated by Electrostatic Field

Deformation of Liquid Lens in Electrostatic Field

Design And Fabrication of High Numerical Aperture And Low Aberration Bi-Convex Micro Lens Array

Application of Aspherical Liquid Lens in Laser Diode Beam Shaping

Fabrication of Miniaturized Variable-focus Lens Using Liquid Filling Technique

Micro Lens Actuator And Polymer Objective Lens For Optical Pickup

Highly Efficient Gradient Solid Immersion Lens with Large Numerical Aperture for Broadband Achromatic Deep Subwavelength Focusing and Magnified Far Field

Formation and curvature tuning of micro lens using surface tension and hydraulic pressure assisted molding process