Abstract:This paper proposes a novel method for the modulation and fabrication of an aspherical microlens from a photocurable polymer for use in optical pickup heads. This novel modulation method can be employed not only to dynamically control the focal length and morphology of the microlens but also to fabricate aspherical lenses after UV curing of the photosensitive polymer. Forces in two dimensions provided by electrowetting and gradient electrostatic forces are applied to shape the polymer liquid from a hemispherical shape into a parabolic or a near- conical shape. Aspherical microlenses are designed based on constant optical-path-length theory and self-aligned by surface- tension forces. For morphology modulation, 2-D voltages are applied at the lower electrodes and between the upper and lower substrates, respectively, on a SU-8 spherical liquid-polymer droplet. The voltage applied at the lower electrodes provides an electrowetting effect on the polymer droplets, thereby reducing the contact angle of the spherical droplet, resulting in a desirable droplet height/baseline ratio for a desirable focal length. The voltage applied between the upper and lower substrates pulls up the droplet mostly at its center portion to form an aspherical shape that is close to a parabolic shape or even a conical shape. As a result, the Strehl ratio of the lens can be varied from 0.0076, as with a spherical shape, to 0.8362, as with a near-parabolic shape, and the focal-spot size can be reduced from 2.302 to 0.778 mum. The proposed method has been successfully implemented and has proven suitable for optical applications in which millimeter-diameter-size lenses with numerical apertures higher than 0.66 and focus-spot resolutions better than 0.8 mum are preferred.

Tunable micro-aspherical lens manipulated by 2D electrostatic forces

Electrostatic-Force-Modulated Microaspherical Lens for Optical Pickup Head

Flexible fluidic lens with polymer membrane and multi-flow structure

In Situ Fabrication of a Tunable Microlens.

Fabrication and Analyses of Bionic Polymer Lens System

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Bioinspired solid–liquid mixed tunable lens with multilayered structure

Novel Micro Lens with Tunable Astigmatism

Modify 2d Gradient-Electrostatic-Forces to Manipulate Micro-Aspherical Lens for Small Form Factor Dvd Pickup Head

Manipulation of Microdisks in Laser Tweezers

Zoom Optical System Using Tunable Polymer Lens

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials

Formation and curvature tuning of micro lens using surface tension and hydraulic pressure assisted molding process

Doublet liquid variable-focus lens for spherical aberration correction

From Spheric To Aspheric Solid Polymer Lenses: A Review

Mechanics of Tunable Hemispherical Electronic Eye Camera Systems That Combine Rigid Device Elements with Soft Elastomers

A novel solid state tunable micro lens

Design and Fabrication of A Copolymer Aspheric Bi-Convex Lens Utilizing Thermal Energy and Electrostatic Force in A Dynamic Fluidic

Electrically Tunable Polymer Stabilized Chiral Ferroelectric Nematic Liquid Crystal Microlenses

Optimum Electrostatic Force Control for Fabricating a Hybrid UV-curable Aspheric Lens