Abstract:This paper proposes a novel method for the modulation and fabrication of an aspherical microlens from a photocurable polymer for use in optical pickup heads. This novel modulation method can be employed not only to dynamically control the focal length and morphology of the microlens but also to fabricate aspherical lenses after UV curing of the photosensitive polymer. Forces in two dimensions provided by electrowetting and gradient electrostatic forces are applied to shape the polymer liquid from a hemispherical shape into a parabolic or a near- conical shape. Aspherical microlenses are designed based on constant optical-path-length theory and self-aligned by surface- tension forces. For morphology modulation, 2-D voltages are applied at the lower electrodes and between the upper and lower substrates, respectively, on a SU-8 spherical liquid-polymer droplet. The voltage applied at the lower electrodes provides an electrowetting effect on the polymer droplets, thereby reducing the contact angle of the spherical droplet, resulting in a desirable droplet height/baseline ratio for a desirable focal length. The voltage applied between the upper and lower substrates pulls up the droplet mostly at its center portion to form an aspherical shape that is close to a parabolic shape or even a conical shape. As a result, the Strehl ratio of the lens can be varied from 0.0076, as with a spherical shape, to 0.8362, as with a near-parabolic shape, and the focal-spot size can be reduced from 2.302 to 0.778 mum. The proposed method has been successfully implemented and has proven suitable for optical applications in which millimeter-diameter-size lenses with numerical apertures higher than 0.66 and focus-spot resolutions better than 0.8 mum are preferred.

Novel Micro Lens with Tunable Astigmatism

In Situ Fabrication of a Tunable Microlens.

A novel solid state tunable micro lens

Bioinspired solid–liquid mixed tunable lens with multilayered structure

Flexible fluidic lens with polymer membrane and multi-flow structure

A Bio-Inspired Optical System with a Polymer Membrane and Integrated Structure

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Thermal Actuated Solid Tunable Lens

Fabrication and Analyses of Bionic Polymer Lens System

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Tunable micro-aspherical lens manipulated by 2D electrostatic forces

Doublet liquid variable-focus lens for spherical aberration correction

Electrostatic-Force-Modulated Microaspherical Lens for Optical Pickup Head

Formation and curvature tuning of micro lens using surface tension and hydraulic pressure assisted molding process

Symmetrical Optical Imaging System with Bionic Variable-Focus Lens for Off-Axis Aberration Correction

Wafer-scale fabricated thermo-pneumatically tunable microlenses

Biconvex Polymer Microlenses with Tunable Imaging Properties Designed by Janus Droplet Microfluidics

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials

Electrically Tunable Polymer Stabilized Chiral Ferroelectric Nematic Liquid Crystal Microlenses

Microlens formation technology utilizing multi-phase liquid ambiance