Abstract:One of the parameters required for a high-performance drive of a surface-mounted permanent magnet synchronous motor (SPMSM) operating in the flux-weakening region is the torque ripple reduction. In general, the torque ripple results from many reasons, such as the machine structure, oscillations of measured speed, etc. Hence, this article proposes an optimized strategy that works in conjunction with a variable switching frequency pulsewidth modulation algorithm to reduce the torque ripple peak. For the modulating algorithm, the updated frequency changes linearly with the desired torque ripple and its predicted maximum peak. For the proposed strategy, the reflection of proportional-integral (PI) parameters is observed at the torque ripple caused by the current ripples. Therefore, a robust method for adjusting PI parameters is proposed that relies on the improved fitness function that can minimize the regulators' error and maximize the drive stability bandwidth in the flux-weakening region. This objective function is optimized offline using a genetic algorithm optimization technique. Meanwhile, a third-order generalized integral flux observer is applied in this article, providing evidence of torque ripple reduction. For driving in the flux-weakening region, the reference magnitude of the duty cycles can produce the required d-axis reference current to prevent the saturation of current controllers. Finally, comprehensive simulations and experiments are presented to validate the proposed strategy effectively. In comparison with the conventional method, the proposed strategy can reduce the copper and switching losses simultaneously and control the current and speed in the flux-weakening region efficiently.

Torque Ripple Minimization of Doubly Salient Permanent-Magnet Motors

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Improved Stator/Rotor-Pole Number Combinations for Torque Ripple Reduction in Doubly Salient PM Machines

Reduction of Commutation Torque Ripple in Brushless DC Motors

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Electromagnetic Characteristics Analysis and Torque Ripple Reduction for Doubly Salient PM Machine

Analysis and Optimization of Torque Ripple Reduction Strategy of Surface-Mounted Permanent-Magnet Motors in Flux-Weakening Region Based on Genetic Algorithm

DSSRM Design with Multiple Pole Arcs Optimization for High Torque and Low Torque Ripple Applications

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

A Combined Finite Element-Domain Elimination Method for Minimizing Torque Ripples in Inverter-Fed AC Motor Drive Systems

Torque ripple analysis and reduction of permanent magnet synchronous motor

A New Method of Torque Ripple Minimization for Brushless DC Motors

Explicit Model Predictive Speed Control for Permanent Magnet Synchronous Motor With Torque Ripple Minimization

Torque Ripple Reduction Method for Permanent Magnet Synchronous Machine Drives With Novel Harmonic Current Control

Force Ripple Minimization Design for Consequent Pole Permanent Magnet Linear Synchronous Motor

Reduction of Torque Ripple Due to Demagnetization in PMSM Using Current Compensation

Torque Ripple Reduction of Switched Reluctance Motor by Optimizing Stator Pole Type