Abstract:The fabrication of a micro/nano-scale thermoelectric module is very challenging. In this paper, a reliableand efficient hybrid fabrication method for ultrathin thermoelectric devices based on the non-contact exposing, photoresist melting and microfabrication technology is presented. The total thickness of the thermoelectric module is about 1 μm. Experimental results indicate that ultrathin thermoelectric device works stable and reliable, and demonstrate that the method presented is suitable for fabrication of thinner and higher integrality devices beyond TE devices in the micro-nanoscale range. The peak output power density is 0.29 W/m 2 and 2.9×10 5 W/m 3 . The present research can provide a useful guide for the design of a micro/nano-scale thermoelectric device in the near future. Additionally, we have demonstrated a novel energy utilization that thermoelectric generation (TEG) device can achieve self-powering by radiative cooling (RC) continuously. An ultrathin TEG with a multilayer thermal emitter was fabricated to convert the heat from the environment into electricity directly by using radiative cooling. The TEG device was consisted of more than 46,000 P-N modules in series, and each two TE modules were connected by air bridge. Thermal emitter had 80.8% emissivity in the atmospheric window (8-13 μm). Besides, maximum temperature drop of 4 K was achieved. With zero energy input, the MEMS chip output voltage of the TEG-RC reached up to 0.5 mV, and the TEG-RC exhibited a continuous average 0.18 mV output for 24 h. Extreme temperature gradients were surprisingly formed in cross section of 1.5 μm thick for micro/nano film materials. In order to improve the thermoelectric efficiency, the crossplane thermal conductivities of nano-constructed Sb 2 Te 3 /(Cu, Ag, Au, Pt) thermoelectric multilayer thin films have been measured using time-domain thermo reflectance method. The interface morphology features of multilayer thin film samples were characterized by using scanning and transmission electron microscopes. The effects of interface microstructure on the cross-plane thermal conductivities of the multilayer thin films have been extensively examined and the thermal transfer mechanism has been explored. The results indicated that electron-phonon coupling occurred at the semiconductor/metal interface that strongly affected the cross-plane thermal conductivity. This work presents both experimental and theoretical understanding of the thermal transport properties of Sb 2 Te 3 /metal multilayer thin film junctions with important implications for exploring a novel approach to improving the thermoelectric conversion efficiency.

A new type of micro-thermoelectric power generator fabricated by nanowire array thermoelectric material

A simple thermoelectric device based on inorganic/organic composite thin film for energy harvesting

Development of Thermoelectric Microdevices by Combining Materials Processing and Silicon Micromachining Technology

A High Power Density Micro-Thermoelectric Generator Fabricated by an Integrated Bottom-Up Approach

Fabrication and Characteristics of Thermoelectric Microgenerators Based on Single Sb Doped ZnO Microwire

Si and SiGe Nanowire for Micro-Thermoelectric Generator: A Review of the Current State of the Art

TEM-compatible microdevice for the complete thermoelectric characterization of epitaxially integrated Si-based nanowires

MEMS Thermoelectric Power Chip for Large Scale Thermal Energy Harvesting

Nanowire-Based Flexible P(Vdf-Trfe) Nanogenerator for Simultaneously Harvesting Mechanical and Thermal Energies

Structural Design of Nanowire Wearable Stretchable Thermoelectric Generator

Network of thermoelectric nanogenerators for low power energy harvesting

Manufacturing thermoelectric micro modules using micromachined silicon wafers

Fabrication and Performance Simulation of Microscale Thermoelectric Modules Made with Bi2Te3-Based Alloys

Fabrication of Bi<sub>2</sub>Te<sub>3</sub> Nanowires Applied in Thermoelectric Generators

Flexible Thermoelectric Generators With Ultrahigh Output Power Enabled By Magnetic Field-Aligned Metallic Nanowires

Fabrication of Bi2te3 Nanowires Applied in Thermoelectric Generators

Design, Fabrication, and Characterization of CMOS MEMS-Based Thermoelectric Power Generators

High‐Performance Micro‐Radioisotope Thermoelectric Generator with Large‐Scale Integration of Multilayer Annular Arrays through Screen Printing and Stacking Coupling

Transitioning from Si to SiGe Nanowires as Thermoelectric Material in Silicon-Based Microgenerators

High‐Performance On‐Chip Thermionic Electron Micro‐Emitter Arrays Based on Super‐Aligned Carbon Nanotube Films

Design and Simulation of a Novel Thermoelectric Micro-Device with Electrodeposited Bi-Te Alloys