Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

A Single-Chip Quad-Band [850/900/1800/1900mhz] Direct Conversion GSM/GPRS RF Transceiver with Integrated VCOs and Fractional-N Synthesizer

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$ -Band Satellite Communications

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$-Band Satellite Communications

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A 54-67-ghz Low-Power Highly-Integrated Transceiver in 65-Nm CMOS for FMCW Radar Applications

A 1.8-V 6/9-GHz switchable dual-band quadrature LC VCO in SiGe BiCMOS technology

A C-Band Four-Channel Receiver with Current-Sharing and Large-Signal Multigated-Transistor Techniques in 65-Nm CMOS

The First Fully Integrated Quad-Band GSM/GPRS Receiver in a 90-nm Digital CMOS Process

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A RF CMOS Zero-IF Receiver Front-end for GSM/EDGE

A 3∼5-GHz low-phase-noise fractional-N frequency synthesizer with AFC for GSM/PCS/DCS/WCDMA tranceivers

A fractional-N frequency synthesizer for cellular and short range multi-standard wireless receiver

A low power bandpass /spl Sigma/ /spl Delta/ modulator injection locked synthesizer

An Implementation of a CMOS Down-Conversion Mixer for GSM1900 Receiver

A High-Linearity WCDMA/GSM Reconfigurable Transceiver in 0.13- CMOS

A Frequency Synthesizer With Optimally Coupled QVCO and Harmonic-Rejection SSBmixer for Multi-Standard Wireless Receiver.

A 3 to 5 Ghz Low-Phase-Noise Fractional-N Frequency Synthesizer with Adaptive Frequency Calibration for Gsm/Pcs/Dcs/Wcdma Transceivers

A 1.5–1.9GHz phase-locked loop (PLL) frequency synthesizer with AFC and Σ-Δ modulator for Sub-GHz wireless transceiver

A 1.1-GHz CMOS fractional-N frequency synthesizer with a 3-b third-order /spl Delta//spl Sigma/ modulator

DSP-coupled 2.4 GHz RF transmitter in 130 nm CMOS

A 130nm CMOS direct conversion transmitter for WCDMA