Abstract:We present a system-on-chip (SoC) that integrates a TMS320C54x digital signal processor (DSP), which is commonly used in cellular phones, with a multigigahertz digital RF transmitter that meets the Bluetooth specifications. The RF transmitter is tightly coupled with the DSP and is directly mapped to its address space. The transmitter architecture is based on an all-digital phase-locked loop (ADPLL), which is built from the ground up using digital techniques and digital creation flow that exploit high speed and high density of a deep-submicrometer CMOS process while avoiding its weaker handling of voltage. The frequency synthesizer features a wideband frequency modulation capability. As part of the digital flow, the digitally controlled oscillator (DCO) and a class-E power-amplifier are created as ASIC cells with digital I/Os. All digital blocks, including the 2.4-GHz logic, are synthesized from VHDL and auto routed. The use of VHDL allows for a tight and seamless integration of RF with the DSP. To take advantage of the direct DSP-RF coupling and to demonstrate a software-defined radio (SDR) capability, a DSP program is written to perform modulation of the GSM standard. The chip is fabricated in a baseline 130-nm CMOS process with no analog extensions and features high logic gate density of 150 kgates per mm2. The RF transmitter area occupies only 0.54 mm2, and the current consumption (including the companion DSP) is 49 mA at 1.5-V supply and 4 mW of RF output. This proves attractiveness and competitiveness of the “digital RF” approach, whose goal is to replace RF functions with high-speed digital logic gates.

DSP-coupled 2.4 GHz RF transmitter in 130 nm CMOS

SoC with an integrated DSP and a 2.4-GHz RF transmitter

A 2 GS/s 14-Bit Current-Steering DAC in 65 Nm CMOS Technology for Wireless Transmitter

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

Integrated D-Band Transmitter and Receiver for Wireless Data Communication in 65 Nm Cmos

The Design of All-Digital Polar Transmitter Based on ADPLL and Phase Synchronized ΔΣ Modulator

13.6 A 2.4GHz WLAN digital polar transmitter with synthesized digital-to-time converter in 14nm trigate/FinFET technology for IoT and wearable applications.

A 20dbm 2.4ghz Digital Outphasing Transmitter for WLAN Application in 32nm CMOS

A 2.4-Ghz Fully CMOS Integrated Transmitter for 802.1lb Wireless LAN

A low power bandpass /spl Sigma/ /spl Delta/ modulator injection locked synthesizer

A Digital ΣΔ Modulated Class-S Transmitter with Two-Step Up-conversion and Filter-less Front End

A Fully CMOS Integrated Transmitter for Wireless LAN Applications

A Fully Integrated QPSK/16-QAM D-Band CMOS Transceiver With Mixed-Signal Baseband Circuitry Realizing Digital Interfaces

A RF Signal Generator for All-digital Transmitter

Design of a Software-Defined Transceiver with High Flexibility for Sensing Applications

Digital RF processing: toward low-cost reconfigurable radios

The First Fully Integrated Quad-Band GSM/GPRS Receiver in a 90-nm Digital CMOS Process

A Cmos 434/868 Mhz Fsk/Ook Transmitter With Integrated Fractional-N Pll

A 1.2V 0.1&#x2013;3ghz Software-Defined Radio Receiver Front-End in 130nm CMOS

A 0.13µm CMOS 1.5-to-2.15ghz Low Power Transmitter Front-End for SDR Applications

An All-Digital Quadrature RF Transmitter with 8-Bit ΣΔ Modulation