Abstract:This paper presents a transistor open-circuit fault diagnosis method based on an average model and post-fault reconfiguration algorithms for a grid-tied single-phase inverter that transfers power bi-directionally. The transistor open-circuit fault occurrence is detected by comparing the average bridge arm pole-to-pole voltage deviation and threshold first. Then, the exact faulty transistor is identified by developed algorithms based on post-fault reconfiguration of control (PFRC) and of utilizing redundant leg (PFRUR). These two fault identification algorithms are suitable for different situations. Compared with the PFRUR, the PFRC can identify the faulty transistor without the help of redundant leg, but the identification time is longer. For inverters equipped with redundant leg already, the PFRUR can achieve faster identification speed so that inverters in reliability-oriented applications can return to normal operation after fault with short interruption. With average model, this method only requires existing signals sampled for control, thus it can be embedded in system easily without adding extra sensors and diagnosis circuits. The sampling frequency can be as low as switching frequency. Furthermore, this method is suitable for both inverters with L or LCL filters. Finally, experiments are carried out on a 550-W/10-kHz grid-tied single-phase inverter to verify the effectiveness.

An open-circuit fault detection based on model reference for active power filter

Unified Model Based Harmonics and Reactive Current Detection

Open-circuit Fault Diagnosis and Fault Tolerance for Shunt Active Power Filter

An Optimized Reference Current Detection Method for Active Power Filter

Fault Diagnosis for Shunt Hybrid Active Power Filter with Open-Circuit Fault Based on Voltage Distortion

Voltage Vector Error Fault Diagnosis for Open-Circuit Faults of Three-Phase Four-Wire Active Power Filters

Cascaded SAPF Fault Diagnosis Method Based on H-bridge Voltage and Current

Fault Diagnosis of Three-Level Active Power Filter Based on Hybrid Logic Model

Model Based Parametric Fault Detection in Power Electronic Circuits

Active Power Filter Based on Adaptive Detecting Approach of Harmonic Currents

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

A New Reference Current Detecting Algorithm Based on FBD Method for Active Power Filter

Simulation study of active power filter based on a novel reactive and harmonic current detection method

Research on Power Capacitor Internal Fault Criterion

A Fast Open-Switch Fault and Open-Winding Fault Distinguish Method Based on Voltage Reference Modification

Open-Switch Fault Diagnosis of Three-Phase PWM Converter Systems for Magnet Power Supply on EAST

An Innovative Arc Fault Model and Detection Method for Circuit Breakers in LCC-HVDC AC Filter Banks

Fault Diagnosis of High Voltage Direct Current System Based on H<inf>&#x221E;</inf> Filter

Switching Function Model-Based Fast-Diagnostic Method Of Open-Switch Faults In Inverters Without Sensors

Fault Diagnosis Based on Hybrid System Model and Filter for Power Electronic Circuits

A Simple and Effective Open-Circuit-Fault Diagnosis Method for Grid-Tied Power Converters—A New Technique Based on Tellegen's Theorem