Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

Low Noise Vacuum MEMS Closed-Loop Accelerometer Using Sixth-Order Multi-Feedback Loops and Local Resonator Sigma Delta Modulator

The Modulation and Demodulation Module of a High Resolution MOEMS Accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

A High-Performance Fourth-Order Sigma-Delta Micromachined Accelerometer

Study Of Closed-Loop High-Resolution Sigma-Delta For A Mems Accelerometer

A High-Performance Closed-Loop Fourth-Order Sigma-Delta Micro-Machined Accelerometer

Digital closed-loop micromachined accelerometer based on cascaded multi-stage-noise-shaping ∑?M

Elimination of nonlinearity in sigma delta MEMS accelerometer

A Fourth-Order Sigma-Delta Interface Circuit For Closed-Loop Micromachined Accelerometer

A Digital Readout Interface For A Surface Micromachined Mems Accelerometer With A Novel Loop Compensator

Modeling and Analysis of a Closed-Loop System for High-Q MEMS Accelerometer Sensor

A Wafer Level Vacuum Encapsulated Capacitive Accelerometer Fabricated in an Unmodified Commercial MEMS Process

A fourth-order 14-bit sigma-delta interface ASIC for MEMS accelerometer

A High-Order Sigma-Delta Modulator Applied in Micro-Accelerometer

A Sigma–delta Interface ASIC for Force-Feedback Micromachined Capacitive Accelerometer

A Novel Digital Closed Loop MEMS Accelerometer Utilizing a Charge Pump.

Design and Noise Analysis of A Sigma-Delta Capacitive Micromachined Accelerometer