Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

A 7.8 Mw 5.2% FSK Error Two-Point Modulator Without Calibration.

A calibration-less low error two-point modulation transmitter for 802.15.4 application

A 0.8 V Low Power Low Phase-Noise Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A Hybrid Loop Two-Point Modulator Without DCO Nonlinearity Calibration by Utilizing 1 Bit High-Pass Modulation

A 2.4 GHz Two-Point Δ-Σ Modulator with Gain Calibration and AFC for WPAN/BAN Applications.

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

A 1mb/s 2.86% EVM GFSK Modulator Based on ΔΣ BB-DPLL Without Background Digital Calibration

A 2 GHz 2 Mb/s Semi-Digital $2^{+}$-Point Modulator with Separate FIR-Embedded 1-Bit DCO Modulation in 0.18 $\mu$ M CMOS

A 0.65V 1.2mw 2.4ghz/400mhz Dual-Mode Phase Modulator for Mobile Healthcare Applications

A 2 GHz 2 Mb/s Semi-Digital <formula Formulatype="inline"><tex Notation="TeX">$2^{+}$</tex></formula>-Point Modulator with Separate FIR-Embedded 1-Bit DCO Modulation in 0.18 <formula Formulatype="inline"><tex Notation="TeX">$\mu$</tex> </formula>m CMOS

A CMOS Low Power Fully Differential Sigma-Delta Frequency Synthesizer for 2mb/s GMSK Modulation

2.4Ghz 20mb/s FSK Receiver Front-End and Transmitter Modulation PLL Design for Energy-Efficient Short-Range Communicaiton

20-Mb/s Gfsk Modulator Based on 3.6-Ghz Hybrid Pll with 3-B Dco Nonlinearity Calibration and Independent Delay Mismatch Control

A 2.4-Ghz ISM Band Delta-Sigma Fractional-N Frequency Synthesizer with Automatic Calibration Technique

A 100Mb/s 3.5GHz Fully-Balanced BFOOK Modulator Based on Integer-N Hyrbrid PLL

A Multi-Bit Fir Filtering Technique for Two-Point Modulators with Dedicated Digital High-Pass Modulation Path

A Digital-Intensive F/Pll-Based Two-Point Modulator with A Constant-Gain Dco for Linear Fmcw Generation

A 5mA 2.4GHz 2-point modulator with QVCO for Zigbee tranceiver in 0.18-μm CMOS

A Ku-Band FSK Modulated Fractional-N PLL With Fine Frequency Resolution