Abstract:To generate high frequency signals for frequency modulated continuous wave (FMCW) application, components such as doubler, tripler or multiplier are usually utilized to process further signals from the low frequency voltage controlled oscillator (VCO). In this paper, a phase-locked loop (PLL) is intended to be the primary part used to generate frequency modulated continuous wave (FMCW) signals from 80 to 84.8 GHz by utilizing a fundamental frequency VCO. To divide those high frequency output signal and large output bandwidth, the auto-tracking Miller divider topology is proposed. This new topology can achieve 9 GHz locking range. In order to generate FMCW signals with a straight-line triangular chirp, the cascaded PLL is used. The integrated jitter from 1 kHz to 1 GHz is 887 fs for the cascaded PLL, while the single stage PLL used 1.264 ps. Moreover, when architecture with doubler or multiplier is used, the fundamental tone has an effect towards the next systems, while the cascaded PLL does not. It can be highlighted that this work achieves the best RMS-FM error /BW chirp and RMS-FM error /(BW chirp × f c × T c ) with value of 0.013% and 0.77e−12 , respectively. The designed PLL for FMCW signal generator is implemented in 28 nm CMOS technology. By using a supply voltage of 1.2 V, the chip consumes power of 102 mW. Including all the chip pads, the implemented circuit occupies a silicon area of 1440 μm × 820 μm.

A Digital-Intensive F/Pll-Based Two-Point Modulator with A Constant-Gain Dco for Linear Fmcw Generation

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

A 2 GHz 2 Mb/s Semi-Digital $2^{+}$-Point Modulator with Separate FIR-Embedded 1-Bit DCO Modulation in 0.18 $\mu$ M CMOS

A 56.4-to-63.4 GHz Multi-Rate All-Digital Fractional-N PLL for FMCW Radar Applications in 65 nm CMOS

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A Hybrid Loop Two-Point Modulator Without DCO Nonlinearity Calibration by Utilizing 1 Bit High-Pass Modulation

A 2 GHz 2 Mb/s Semi-Digital <formula Formulatype="inline"><tex Notation="TeX">$2^{+}$</tex></formula>-Point Modulator with Separate FIR-Embedded 1-Bit DCO Modulation in 0.18 <formula Formulatype="inline"><tex Notation="TeX">$\mu$</tex> </formula>m CMOS

A 65 Nm 19.1-to-20.4 GHz Sigma-Delta Fractional-N Frequency Synthesizer with Two-Point Modulation for FMCW Radar Applications

A Self-Adapted Two-Point Modulation Type-II Digital PLL for Fast Chirp Rate and Wide Chirp-Bandwidth FMCW Signal Generation

A Multi-Bit Fir Filtering Technique for Two-Point Modulators with Dedicated Digital High-Pass Modulation Path

A Digital Optical Phase-Locked Loop For Diode Lasers Based On Field Programmable Gate Array

DCO gain calibration technique in fractional-N Δ-Σ PLL based two-point phase modulators.

DCO gain calibration technique in fractional-N Delta-Sigma PLL based two-point phase modulators

An Overview of Digital-Intensive ΔΣ Phase-Locked Loops Utilizing 1-Bit Conversion and Modulation.

A 12-Ghz Calibration-Free All-Digital PLL for FMCW Signal Generation with 78 MHz/μs Chirp Slope and High Chirp Linearity.

An 80–84.8 GHz PLL with auto-tracking Miller divider for FMCW applications

A Hybrid Frequency/phase-Locked Loop for Versatile Clock Generation with Wide Reference Frequency Range

A 2.4 GHz Two-Point Δ-Σ Modulator with Gain Calibration and AFC for WPAN/BAN Applications.

A 2.9 GHz Variable Inductor-Based DCO with 1.3 Khz Frequency Resolution for FMCW Radar Applications

A 1.5ghz All-Digital Frequency-Locked Loop With 1-Bit Delta Sigma Frequency Detection In 0.18 Mu M Cmos

A 1.5GHz all-digital frequency-locked loop with 1-bit ΔΣ frequency detection in 0.18μm CMOS