Abstract:Asynchronous circuits with low power and robustness are revived in emerging applications such as the Internet of Things (IoT) and neuromorphic chips, thanks to clock-less and event-driven mechanisms. However, the lack of mature computer-aided design (CAD) tools for designing large-scale asynchronous circuits results in low design efficiency and high cost. This article proposes an end-to-end bundled-data (BD) asynchronous circuit design flow, which can facilitate building asynchronous circuits, even if the designer has little or no asynchronous circuit foundation. Three features that enable this are: 1) a lightweight circuit converter developed in Python can convert circuits from synchronous descriptions to corresponding asynchronous ones at register transfer level (RTL). Desynchronization flow helps designers maintain a "synchronization mentality" to construct asynchronous circuits; 2) a synchronization-like verification method is proposed for asynchronous circuits so that it can be functionally verified before synthesis. Avoids the risk of rework after logic defects are discovered during the synthesis and implementation, as asynchronous circuits often cannot be simulated until gate-level (GL) netlist generation; and 3) the whole implementation flow from RTL to graphic data system (GDS) is based on commercial electronic design automation (EDA) tools. Similar to the design flow of synchronous circuits, it helps designers implement asynchronous circuits with "synchronization habits." Furthermore, to validate this methodology, two asynchronous processors were, respectively, implemented and evaluated in the TSMC 28-nm CMOS process. Compared to their synchronous counterparts, the general-purpose asynchronous RISC-V processor achieves 20.5% power savings. And the domain-specific asynchronous spiking neural network (SNN) accelerator achieves 58.46% power savings and 2.41x energy efficiency improvement at 70% input spike sparsity.

A New Approach for Gate-Level Delay-Insensitive Asynchronous Logic

Asynchronous Techniques for System-on-Chip Design

Analytical delay variation modeling for evaluating sub-threshold synchronous/asynchronous designs

STT-MRAM Based Low Power Synchronous Non-Volatile Logic with Timing Demultiplexing

Toward Efficient Asynchronous Circuits Design Flow Using Backward Delay Propagation Constraint

Silicon on insulator null convention logic based asynchronous circuit design for high performance low power digital systems

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.

A Low-Power Asynchronous RISC-V Processor with Propagated Timing Constraints Method

Towards Energy-Efficient Asynchronous Circuit Design with Flip-Flop-to-Latch Replacement

An End-to-End Bundled-Data Asynchronous Circuits Design Flow: from RTL to GDS

Timing error resilient clock gate design for wide-voltage application

New Method for Low Power Sequential Circuit Design Based on Clock Gating

A Robust Asynchronous Approach for Realizing Ultra-Low Power Digital Self-Adaptive VDD Scaling System

Fine-grained Power Gating for Leakage and Short-circuit Power Reduction by using Asynchronous-logic.

An Asynchronous Design Method and Its Application on a Low-Power RFID Baseband Processor

A Fast Computable Delay Model for Subthreshold Circuit.

An approach to synthesis delay semantics in VHDL.

Optimize Asynchronous Design by Synchronous Synthesis Tool

Local Logic Substitution Algorithm for Post-Layout Re-Synthesis

Minimizing Leakage Power In Aging-Bounded High-Level Synthesis With Design Time Multi-V-Th Assignment

Dual-Vth Leakage Reduction with Fast Clock Skew Scheduling Enhancement