Abstract:Spherical glass beads weaken the influences of particle morphology, surface properties, and microscopic fabric on shear strength, which is significant for revealing the relationship between macroscopic particle friction mechanisms and the particle size distribution of sand. This paper explores the shear mechanical properties of glass beads with different particle size ratios under different confining pressures. It obtains the particle size ratio and fractal dimension D through an optimal mechanical response. Simultaneously, we explore the range of the fractal dimension D under well-graded conditions. The test results show that the strain-softening degree of Rs is more obvious under a highly effective confining pressure, and the strain-softening degree of Rs can reach 0.669 when the average particle size d ̄ is 0.5 mm. The changes in the normalized modulus ratio Eu/Eu50 indicate that the particle ratio and arrangement are the fundamental reasons for the different macroscopic shear behaviors of particles. The range of the peak effective internal friction angle φ is 23 °~35 °, and it first increases and then decreases with the increase in the effective confining pressure. As the average particle size increases, the peak stress ratio MFL and the peak effective internal friction angle φ first increase and then decrease, and both can be expressed using the Gaussian function. The range of the fractal dimension D for well-graded particles is 1.873 to 2.612, and the corresponding average particle size d ̄ ranges from 0.433 to 0.598. Under the optimal mechanical properties of glass beads, the particle size ratio of 0.25 mm to 0.75 mm is 23:27, and the fractal dimension D is 2.368. The study results provide a reference for exploring friction mechanics mechanisms and the optimal particle size distributions of isotropic sand.

Low self-affine exponents of fracture surfaces of glass ceramics

Anisotropic self-affine properties of experimental fracture surfaces

Scaling exponents for fracture surfaces in homogenous glass and glassy ceramics

Two-Dimensional Scaling Properties of Experimental Fracture Surfaces

Roughness of oxide glass subcritical fracture surfaces

Fracture of glassy materials as detected by real-time Atomic Force Microscopy (AFM) experiments

Fracture of silicate glasses: Micro-cavities and correlations between atomic-level properties

Failure mechanisms and surface roughness statistics of fractured Fontainebleau sandstone

Effect of the porosity on the fracture surface roughness of sintered materials: From anisotropic to isotropic self-affine scaling

A Kinship between the EGRET SNR's and Sgr A East

Nonequilibrium plastic roughening of metallic glasses yields self-affine topographies with strain-rate and temperature-dependent scaling exponents

Cracking in polymer glasses and evolution at zero stress: Highlighting discrete long time scale relaxations

Roughness and Scaling Properties of Oxide Glass Surfaces at the Nanoscale

Origin of the Universal Roughness Exponent of Brittle Fracture Surfaces: Correlated Percolation in the Damage Zone

Poisson ratio and excess low-frequency vibrational states in glasses

Fractography of Self-Glazed Zirconia with Improved Reliability

Influence of Zirconia Sol-Gel Coating on Fracture Strength of Chemical Strengthened Soda Lime Glass

Intrinsic ductility of glassy solids

Shear Mechanism and Optimal Estimation of the Fractal Dimension of Glass Bead-Simulated Sand

Evolution of nanoscale morphology on fracture surface of brittle metallic glass

Statistics and Microphysics of the Fracture of Glass