Abstract:The widespread use of sodium aluminosilicate glass in many engineering applications due to its mechanical and optical properties (transparency, dielectric, etc.), has become common in recent years. However, glass, a brittle material, has its vulnerability to fracture. Processes such as heat treatment (heat tempering) or chemical strengthening through ion-exchange have been used to create residual stress profiles on the glass, in a bid to improve its fracture strength. However, failure still occurs, which is mostly catastrophic and expensive to repair. Therefore understanding, predicting, and eventually improving the resistance to damage or fracture of chemically strengthened glass is important to designing new glasses that would be tougher while retaining their transparency. The relationship between the glass residual stress parameters such as the compressive stress (CS), depth of compression layer (DOL), and central tension (CT) versus apparent (effective) fracture toughness for different crack depth was investigated in this study using a Silicon Carbide particle blast plus ring-on-ring (RoR) test method. The results also showed that improving the fracture resistance of glass via chemical strengthening requires a proper combination of CS, DOL, and CT, which is particularly dependent on the initial/existing crack (flaw) depth. It was determined that for a damage event involving the introduction of a shallow crack depth, the criterion for optimal resistance to fracture, in terms of apparent fracture toughness, is weighted more towards a high CS, than deep DOL while for a deep flaw damage event, it is more weighted towards deep DOL, than a high CS. These results provide a valuable piece of information in the design of a more robust glass in engineering applications.

Statistics and Microphysics of the Fracture of Glass

Size-Dependent Brittle-To-Ductile Transition in Silica Glass Nanofibers

Fracture of silicate glasses: Micro-cavities and correlations between atomic-level properties

Fracture mechanical behavior of polymers: 1. Amorphous glassy state

A molecular-dynamics study of ductile and brittle fracture in model non-crystalline solids

Criticality in the fracture of silica glass: Insights from molecular mechanics

Bridging necking and shear-banding mediated tensile failure in glasses

Evaluation and Comparison of Fracture Toughness of Glass Fibre Reinforce Composites

Universality in the fracture of silica glass

Correlation of Fragility of Supercooled Liquids with Elastic Properties of Glasses

Brittle to ductile transitions in glasses: Roles of soft defects and loading geometry

Intrinsic ductility of glassy solids

Strength of 2D Glasses Explored by Machine-Learning Force Fields

Brittle yielding of amorphous solids at finite shear rates

Tensile fracture morphologies of bulk metallic glass

Statistical Analysis of Fracture Toughness of Soda-Lime Glass Determined by Indentation

Fracture of glassy materials as detected by real-time Atomic Force Microscopy (AFM) experiments

The Competing Effect of Initial Crack Depth Versus Chemical Strengthening Parameters on Apparent Fracture Toughness of Sodium Aluminosilicate Glass

Statistical Physics of Fracture Surfaces Morphology

Fracture in metallic glasses: mechanics and mechanisms

Statistical physics of the yielding transition in amorphous solids