Abstract:Ever since the very first human-made knapped tools, the control of fracture propagation in brittle materials has been a vector of technological development. Nowadays, a broad range of applications relies on crack propagation control, from the mitigation of damages, e.g., from impacts in glass screens or windshields, to industrial processes harnessing fracture to achieve clean cuts over large distances. Yet, studying the fracture in real time is a challenging task, since cracks can propagate up to a few km/s in materials that are often opaque. Here, we report on the in situ investigation of cracks propagating at up to 2.5 km/s along a (001) plane of a silicon single crystal, using X-ray diffraction megahertz imaging with intense and time-structured synchrotron radiation. The studied system is based on the Smart Cut process, where a buried layer in a material (typically Si) is weakened by micro-cracks and then used to drive a macroscopic crack (0.1 m) in a plane parallel to the surface with minimal deviation (1 nm). The results we report here provide the first direct confirmation that the shape of the crack front is not affected by the distribution of the micro-cracks, which had been a postulate for previous studies based on post-fracture results. We further measured instantaneous crack velocities over the centimeter-wide field-of-view, which had only been previously inferred from sparse point measurements, and evidence the effect of local heating by the X-ray beam. Finally, we also observed the post-crack movements of the separated wafer parts, which can be explained using pneumatics and elasticity. Thus, this study provides a comprehensive view of controlled fracture propagation in a crystalline material, paving the way for the in situ measurement of ultra-fast strain field propagation.

A Kinship between the EGRET SNR's and Sgr A East

Fracture of glassy materials as detected by real-time Atomic Force Microscopy (AFM) experiments

Glass breaks like metals, but at the nanometer scale

Nanoscale damage during fracture in silica glass

Crack path instabilities in DCDC experiments in the low speed regime

Cracking in polymer glasses and evolution at zero stress: Highlighting discrete long time scale relaxations

Roughness of oxide glass subcritical fracture surfaces

Fracture of silicate glasses: Micro-cavities and correlations between atomic-level properties

Intermittent in-situ high-resolution X-ray microscopy of 400-nm porous glass under uniaxial compression: study of pore changes and crack formation

Evolution of nanoscale morphology on fracture surface of brittle metallic glass

Stress-enhanced ion diffusion at the vicinity of a crack tip as evidenced by atomic force microscopy in silicate glasses

Understanding fast macroscale fracture from microcrack post mortem patterns

Damage mechanisms in the dynamic fracture of nominally brittle polymers

Observing the crack tip behaviour at the nanoscale during fracture of ceramics

Size effects in micro and nanoscale materials fracture

Cracks and Crazes: On calculating the macroscopic fracture energy of glassy polymers from molecular simulations

Crack tip cavitation in metallic glasses

Brittle fracture studied by ultra-high speed synchrotron X-ray diffraction imaging

Crack arrest and stress dependence of laser-induced surface damage in fused-silica and borosilicate glass

Scaling exponents for fracture surfaces in homogenous glass and glassy ceramics

"Ductile" Fracture of Metallic Glass Nanolaminates