Study on Microstructure and High Temperature Stability of WTaVTiZrx Refractory High Entropy Alloy Prepared by Laser Cladding

Xiaoyu Ding,Weigui Wang,Haojie Zhang,Xueqin Tian,Laima Luo,Yucheng Wu,Jianhua Yao
DOI: https://doi.org/10.3390/e26010073
IF: 2.738
2024-01-16
Entropy
Abstract:The extremely harsh environment of the high temperature plasma imposes strict requirements on the construction materials of the first wall in a fusion reactor. In this work, a refractory alloy system, WTaVTiZrx, with low activation and high entropy, was theoretically designed based on semi-empirical formula and produced using a laser cladding method. The effects of Zr proportions on the metallographic microstructure, phase composition, and alloy chemistry of a high-entropy alloy cladding layer were investigated using a metallographic microscope, XRD (X-ray diffraction), SEM (scanning electron microscope), and EDS (energy dispersive spectrometer), respectively. The high-entropy alloys have a single-phase BCC structure, and the cladding layers exhibit a typical dendritic microstructure feature. The evolution of microstructure and mechanical properties of the high-entropy alloys, with respect to annealing temperature, was studied to reveal the performance stability of the alloy at a high temperature. The microstructure of the annealed samples at 900 °C for 5–10 h did not show significant changes compared to the as-cast samples, and the microhardness increased to 988.52 HV, which was higher than that of the as-cast samples (725.08 HV). When annealed at 1100 °C for 5 h, the microstructure remained unchanged, and the microhardness increased. However, after annealing for 10 h, black substances appeared in the microstructure, and the microhardness decreased, but it was still higher than the matrix. When annealed at 1200 °C for 5–10 h, the microhardness did not increase significantly compared to the as-cast samples, and after annealing for 10 h, the microhardness was even lower than that of the as-cast samples. The phase of the high entropy alloy did not change significantly after high-temperature annealing, indicating good phase stability at high temperatures. After annealing for 10 h, the microhardness was lower than that of the as-cast samples. The phase of the high entropy alloy remained unchanged after high-temperature annealing, demonstrating good phase stability at high temperatures.
physics, multidisciplinary
What problem does this paper attempt to address?
### What problem does this paper attempt to solve? This paper aims to investigate the microstructure and high-temperature stability of a novel high-entropy alloy (WTaVTiZr_x) under extreme high-temperature plasma environments. Specifically, the research team designed and prepared this refractory high-entropy alloy using laser cladding technology and explored the effects of different Zr proportions on the alloy's microstructure, phase composition, and chemical composition. Additionally, the paper studies the microstructural evolution and mechanical property changes of this high-entropy alloy at different annealing temperatures to evaluate its performance stability under high-temperature conditions. ### Research Background and Objectives - **Background**: The first wall material of a controlled nuclear fusion reactor needs to withstand the impact of extreme high-temperature plasma environments and possess good mechanical properties and radiation resistance. - **Objective**: To develop a new material suitable for the first wall of nuclear fusion reactors, which should have low activation, high entropy characteristics, and maintain stability under high-temperature conditions. ### Main Research Content - Designed a high-entropy alloy system composed of five elements (W, Ta, V, Ti, and Zr). - Prepared high-entropy alloy coatings using the laser cladding method. - Investigated the effects of different Zr proportions on the alloy's microstructure and phase composition using metallographic microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). - Explored the impact of annealing temperature on the alloy's microstructure and mechanical hardness. Through the above research, the paper reveals the performance stability of high-entropy alloys after high-temperature annealing and their potential application value.