Retrofitting intact and heat-damaged shear-deficient concrete beams using CFRP ropes and dowels

Rami H. Haddad,Ahmad N. Abu Abah

DOI: https://doi.org/10.1680/jmacr.24.00088

IF: 2.46

2024-06-27

Magazine of Concrete Research

Abstract:The potential of recovering shear capacity of heat-damaged beams using carbon fiber-reinforced polymer (CFRP) ropes was investigated. Twelve concrete beams with shear reinforcement deficiency (150 × 250 × 1450 mm 3 ) were cast and cured for high maturity. Six beams were heat-treated for two hours in an electric furnace under a high temperature of 400°C, while the others were kept undamaged. All beams were retrofitted with NSM-CFRP ropes mounted near surface (NSM) as external U-shaped stirrups, inserted in vertical holes (embedded through reinforcement) or implemented as a hybrid system of both. Lateral dowels were implanted in concrete along with schemes that involve using U-shaped stirrups to improve resistance against cover separation and shear failure, respectively. The mechanical behavior of all beams was evaluated under a three-point loading test setup, with data collected and analyzed to characterize the relationships between load and deflection. Cracking and failure modes were monitored and analyzed as well. The schemes adopted allowed restoring load capacity and improving toughness and ductility for the heat-damaged beams at 400°C, but not for flexural stiffness. Moreover, implementing the ropes, as U-shaped external stirrups, terminated 20 mm below the top surface of the beams, helped avert side-cover separation, yet resulted in triggering horizontal shear failure at the level of the upper concrete cover of the heat-damaged beams. The residual strain induced in the U-shaped external stirrups ranged from 14% to 40%, which is compatible with those reported in literature works adopting similar repair methodologies.

construction & building technology,materials science, multidisciplinary