Abstract:Abstract Current experimental methods of assessing rock fracture toughness require a large sample size (i.e., Brazillian test, semi-circular bending, three-point bending), which cannot be extracted at greater depths and along horizontal well. Alternatively, fracture toughness can be evaluated at a finer scale using scratch testing. This study investigates the rock failure mechanism using micro-scratch testing and phase field modeling on rock fragments. The phase field approach models the crack growth and initiation based on energy minimization principles and by portraying the crack surface as a diffused entity. The method has been known for its robustness in preventing numerical singularities due to sharp crack discontinuities in complex crack topologies. In the phase-field scheme, a regularization scalar order parameter is used to indicate the material’s state (from undamaged to damage) during fracture formation. The associated loss of stiffness in rock during fracture formations is captured by the coupling of selected energy degradation function with embedded scalar order parameter and partial differential equations defining the deformation, history, and phase-field evolutions. In doing so, information on stress strain development is needed to evaluate the change in free energy during cracks formation. In this study, scratch testing is used to obtain load-displacement data related to stress strain history. During the test, an indenter scratches the surface of the rock under increasing load. The critical loads where the crack initiates and the chipping spallation occurs are identified based on the microscopic observations, acoustic emission signals, recorded tangential force and recorded depth. The critical loads are used to determine the crack length associated with chipping formation, while the recorded force displacement data are used to obtain the dimensionless stress-strain curve. Both the crack lengths and the dimensionless stress strain curve are then used as the input to the phase field model developed to approximate the fracture toughness of the rock tested. Scratch tests are performed on samples obtained from Eagle Ford formation. The experiments are conducted in short transverse and divider orientations. The crack formations are studied under the progressive load application. The critical loads where crack initiates and chips form are identified mainly based on the panoramic picture obtained after the test and the spikes seen on the Acoustic Emission signals. Preliminary results show that the fracture toughness is lower for samples tested in parallel to the bedding orientation (i.e., divider). Fracture toughness of rocks has attracted wide attention in the last few years in the design and analysis of hydraulic fracturing for hydrocarbon and geothermal recovery. The currently proposed methodology allows for a quicker and more reliable way of approximating rock fracture toughness from small rock samples. The incorporation of the phase field model allows better prediction of rock fracture toughness as the method is capable of overcoming classical model limitations of quantifying crack initiation and crack propagation in the complex fracture networks.

Finite element analysis of the indentation test on rocks with microstructure

Preliminary Study of Two-Scale Model for Analyzing Brittle Rock Based on Asymptotic Expansion Method

Numerical analysis for failure evolution process of rock with initial micro defects

Introduction of a Scaling Factor for Fracture Toughness Measurement of Rocks Using the Semi-circular Bend Test

Experimental investigation of rock strength using indentation test and point load test

FINITE ELEMENT SIMULATION OF FRACTURE PROCESS OF ROCK SAMPLES WITH A INCLINED SLIT

A new method to rapidly and accurately assess the mechanical properties of geologically relevant materials

Discrete Element Analysis Of The Effect Of Meso-Structure Heterogeneity On The Mechanical Behavior Of Rock

Numerical study of the evolution of cohesion and internal friction in rock during the pre-peak deformation process

Experiment Study Of Rock Strength Degradation

Three‐dimensional finite element simulation of fracture propagation in rock specimens with pre‐existing fissure(s) under compression and their strength analysis

Cavity expansion analysis of normal indention of rocks with lateral confinement

Numerical simulation of strength size effect of rocks under different loadings

Experimental study on the shear mechanical behaviour of rock-like materials containing one embedded flaw under unloading normal stress conditions

Numerical Simulation on Effect of Indenter Radius During Point Load Test

A numerical simulation-based ANN method to determine the shear strength parameters of rock minerals in nanoscale

Approximation of Rock Fracture Toughness using Scratch Test and Phase-Field Modeling Approach

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

Size effect on flexural strength of notched and un-notched concrete and rock specimens by Finite Fracture Mechanics

DEM Simulation of the Behavior of Rockfill Sheared with Different Intermediate Principle Stress Ratios

Strength and energy consumption of inherently anisotropic rocks at failure