Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

A numerical simulation-based ANN method to determine the shear strength parameters of rock minerals in nanoscale

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Novel Intelligent Approach for Peak Shear Strength Assessment of Rock Joints on the Basis of the Relevance Vector Machine

A Method for Estimating the Mechanical Parameters of the Laminae of Laminated Rocks Based On Uniaxial Compression and Tensile Tests

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Estimating the macro strength of rock based on the determined mechanical properties of grains and grain-to-grain interfaces

Numerical Method to Determine Mechanical Parameters of Engineering Design in Rock Masses

Fusion of finite element and machine learning methods to predict rock shear strength parameters

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Numerical Simulation of Direct Shear Test of Rockfill Based on Particle Breaking

Determination of the shear failure areas of rock joints using a laser scanning technique and artificial intelligence algorithms

Mechanical properties and energy conversion of 3D close-packed lattice model for brittle rocks

Application of nanoindentation technology in rocks: a review

Numerical Investigations of the Dynamic Shear Behavior of Rough Rock Joints

Application of the four-dimensional lattice spring model in direct shear testing of intact rock

Nano-scale mechanical properties of constituent minerals in shales investigated by combined nanoindentation statistical analyses and SEM-EDS-XRD techniques

Shear-induced anisotropy analysis of rock masses containing non-coplanar intermittent joints

Micromechanics-based model study of shear properties of brittle rocks

Numerical Investigations on Shear Behavior and Failure Mechanism of Non-persistent Jointed Rocks

Numerical study of the evolution of cohesion and internal friction in rock during the pre-peak deformation process