Abstract:A solid potentiometric CO 2 sensor has been developed using Li 3 PO 4 as the electrolyte, Li 2 TiO 3 /TiO 2 as the reference electrode, and Li 2 CO 3 as the sensing electrode. The Li 3 PO 4 film was deposited on Al 2 O 3 substrate by resistance heating evaporation. Two Pt electrodes with designed patterns were formed on the electrolyte film by micro fabrication technologies. The reference electrode and the sensing electrode were prepared by thick-film technology to cover part of the two Pt electrodes. Various properties were tested: sensitivity under different conditions, response and recovery properties, cross-interference performance, and stability. The values of ΔEMF/dec are 22 mV/dec, 45 mV/dec, and 78 mV/dec in accordance with the operating temperatures: 300°C, 400°C, and 500°C. At 500°C, the response time and recovery time are 30 s and 40 s, respectively, which is better than those of 400°C. When the thickness of Li 3 PO 4 film is greater than 650 nm, the EMF output of the sensor changes little with change of the film thickness. From the results, it can be concluded that the optimal working temperature for the sensor is 500°C, and the optimal thickness of Li 3 PO 4 is about 650 nm.

Humidity Response Properties of A Potentiometric Sensor Using Laf3 Thin Film As the Solid Electrolyte

Response Characteristics of A Potentiometric Co2 Gas Sensor Based on Li3po4 Solid Electrolyte Using Au Film As the Electrodes

Au Thin-Film Electrodes Based Potentiometric CO 2 Sensor Using Li 3 PO 4 As Both the Reference Material and the Solid Electrolyte

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

Note: Response Characteristics of the Sensor Based on Laf3 Thin Film to Different Humidified Gases

A fast response resistive thin film humidity sensor based on poly(4-vinylpyridine) and poly(glycidyl methacrylate)

A highly water-resistive humidity sensor based on silicon-containing polyelectrolytes prepared by one-pot method

A surface acoustic wave humidity sensor based on electrosprayed silicon-containing polyelectrolyte

A Novel Highly Reversible Humidity Sensor Based on Poly(2-Propyn-2-furoate)

A potentiometric oxygen sensor based on LaF3 using Pt micro grid as the sensing electrode.

Solid Potentiometric ${\rm CO}_{2}$ Sensor Using ${\rm Li}_{3}{\rm PO}_{4}$ Film as the Electrolyte

Fabrication of thin film potentiometric CO2 sensors on differentiate substrate surfaces and their characteristics

Humidity sensitive properties of a novel soluble conjugated copolymer: ethynylbenzene-co-propargyl alcohol

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

Facile Fabrication of Poly (diallyldimethyl Ammonium Chloride)/ti3c2tx/poly (vinylidene Fluoride) 3D Hollow Fiber Membrane Flexible Humidity Sensor and Its Application in the Monitoring of Health-Related Physiological Activity

Design, fabrication and performance of SO2 sensor based on LaF3 solid-electrolyte

Humidity sensitive properties and sensing mechanism of π-conjugated polymer p-diethynylbenzene-co-propargyl alcohol

Ultrasensitive and flexible humidity sensors fabricated by ion beam sputtering and deposition from polydimethylsiloxane

A Novel Resistive Humidity Sensor Based On Sodium Polystyrenesulfonate/Tio2 Nanocomposites

A Potentiometric So2 Gas Sensor Based On The Li3po4-Li2sio3 Solid Electrolyte Thin Film

Solid potentiometric CO 2 sensor using Li 3PO 4 film as the electrolyte