Abstract:Flexible fabric formworks and bespoke Wound Fibre-Reinforced Polymer (W-FRP) cages have been proposed to address the difficulties of constructing geometrically optimised concrete structures with minimised material consumptions. However, the existing codes of practice for FRP reinforced concrete structures are not able to provide accurate shear behaviour predictions, resulting in potential premature anchorage failure. This paper presents a revised shear design approach for non-prismatic beams reinforced with W-FRP based on the Modified Compression Field Theory (MCFT), which considers the non-prismatic geometries, geometrical nonlinearity and internal load redistributions. The revised shear design approach is calibrated against previous fabric-formed T beam tests and parametric analyses are conducted to minimise the material usage of the previous T-beams. The validity of the shear design approach is further confirmed with a new T-beam test. The new test shows that the T beam designed with the MCFT based approach failed in the expected flexural failure mode with an ultimate capacity of 245 kN applied load. The predictions can effectively model the bar force development of the inclined flexural reinforcement with a Normalised Root Mean Square Error (NRSME) of 4.4%. The proposed shear design method improved the prediction accuracy of flexural bar force at ultimate capacity by 40% compared to the codified shear design method. By addressing the shear contributions of inclined flexural reinforcement and required anchorage strength, further applications of this novel flexibly formed beams with optimised geometries are expected to achieve material consumption reduction and hence lower carbon emissions from concrete structures.

Statistical studies on material behavior of CFRP sheets under uniaxial loads and its application in reliability analysis

Shear Design Method for Non-Prismatic Concrete Beams Reinforced Using W-FRP

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Analysis and Calculation of Flexural Strength of RC Members Strengthened with CFRP Sheet

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Impact responses and residual flexural properties of narrow CFRP laminates

Analysis of the Tensile Properties and Probabilistic Characteristics of Large-Tow Carbon Fiber-Reinforced Polymer Composites

Study on Probability Model and Length Effect of Tensile Strength of Unidirectional CFRP Plate

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A PRACTICAL METHOD OF ULTIMATE FLEXURAL CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP PLATES

A model for predicting flexural capacity of PVC‐CFRP tube confined reinforced concrete beams

Stressing State Analysis of Reinforced Concrete Beam Strengthened by CFRP Sheet with Anchoring Device

Fatigue failure mechanisms and probabilistic S-N curves for CFRP–steel adhesively bonded joints

Fatigue performance criteria for CFRP Reinforcements Based on RC behavior in civil construction

Life cycle reliability assessment of reinforced concrete beams shear‐strengthened with carbon fiber reinforced polymer strips in accordance with fib bulletin 14

Experimental Study on Interfacial Bond Behavior between CFRP Sheets and Steel Plates under Fatigue Loading

Non-linear Finite Element Analysis of the Flexural Reinforced Concrete Beam Strengthened with CFRP Sheets

Reliability-based design method for shear capacity of steel reinforced engineered cementitious composites (ECC) beams

Study on Flexural Behavior of Timber Beams Strengthened with FRP