Abstract:This paper presents an experimental investigation on the flexural behaviour of corroded reinforced concrete (RC) continuous beams strengthened by carbon fabric-reinforced cementitious matrix (C-FRCM). A total of ten specimens with different degrees of corrosion were tested under in-plane bending. The strengthening C-FRCM plates were prefabricated with different layers of carbon fabric meshes for reinforcement, while some specimens were further strengthened by U-shaped wrapping for C-FRCM plates as the end anchorage. The flexural behaviour including failure modes, load-carrying capacities, deflections and redistribution of bending moment were carefully studied. The WA results show that the load-carrying capacities of RC continuous beams were enhanced by the prefabricated C-FRCM plates and the enhancement further increased with the increase of the layer of carbon fabric meshes, in particular the specimens strengthened by U-shaped wrapping that effectively inhibited the debonding of C-FRCM plates. However, the redistribution capacities of the bending moment of RC continuous beams were weakened by the prefabricated C-FRCM plates. The design flexural strengths calculated using the design formulae given in ACI 440.2R-08, ACI 549.4R-13, AC434-0616-R1, FIB Bulletin 14 and CECS 146-2003 (2007) are also compared with the WA flexural strengths, in which ACI 549.4R-13 and AC434-0616R1 are the identical design guidelines for FRCM system, while the other three design guidelines are specific to FRP system. It is shown that the current design guidelines are all conservative for C-FRCM strengthened RC continuous beams, especially the specimens further strengthened by U-shaped wrapping, in which FIB Bulletin 14 provides the best predictions with the smallest value of COV.

Analysis and Calculation of Flexural Strength of RC Members Strengthened with CFRP Sheet

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Analysis and calculating method of flexural capacity of RC T-beams strengthened with prestressed CFRP sheets

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

A PRACTICAL METHOD OF ULTIMATE FLEXURAL CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP PLATES

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

The simplified calculation for flexural bearing capacity of RC beams strengthened with carbon fiber sheets

Non-linear Finite Element Analysis of the Flexural Reinforced Concrete Beam Strengthened with CFRP Sheets

Analysis on Stress and Short-term Flexural Stiffness of Strengthened RC Beam Prestressed with CFRP Sheets

Mechanical Analysis of the Flexural Steel Beams Strengthened with CFRP

ANALYSIS OF FLEXURAL FAILURE MODE OF RC BEAMS STRENGTHENED WITH CFRP SHEETS

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Experimental Study on the Flexural Capacity of Steel Beams Strengthened by CFRP Plate under Secondary Load

Calculation of Bearing Capacity of RC Member in Bending with FRP Reinforcement

Simplified Method for Flexural Strength of RC Members Based on Superposition Method

Flexural Behaviour of C-FRCM Strengthened Corroded RC Continuous Beams

Flexural capacity of RC beams strengthened with carbon fiber sheets

Flexure Strengthening and Analysis Using CFRP Composite and Reactive Powder Concrete

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIORS OF CFRP PLATE REINEORCED CONCRETE