Abstract:Broad-area diode lasers with high output power and low lateral divergence angle are highly desired for extensive scientific and industrial applications. Here, we report on the epitaxial design for higher output power and a flared waveguide design for reduced divergence, which leads to high power operation with a low lateral divergence angle. A vertically asymmetric epitaxial structure was employed and optimized for low internal optical loss and high efficiency to realize high output power operation. Using a flared waveguide design, the lateral divergence angle was efficiently reduced by decreasing the number of high-order lateral optical modes significantly. The flared waveguide design introduces a smooth modification of the ridge width along the cavity without deteriorating laser performance. Based on the optimized epitaxial and waveguide design, we scaled the waveguide width to realize high continuous-wave power of 34.5 W at 25 °C. A low lateral divergence angle of 8° and high power conversion efficiency of 60% were achieved at the operating power level of 25 W. The life test data (30 A at 45 °C for 39 units, 0 failures in 1000 h) demonstrated reliable operation illustrating the efficient design for reduced lateral divergence angle and high operating power.

High-Brightness 850 Nm Tapered Laser Diodes

996 Nm High-Power Single-Longitudinal-mode Tapered Gain-Coupled Distributed Feedback Laser Diodes.

Investigation of the gain match in high brightness 980 nm tapered diode laser

990 Nm High-Power High-Beam-Quality DFB Laser with Narrow Linewidth Controlled by Gain-Coupled Effect

High-power Single-Longitudinal-mode Double-Tapered Gain-Coupled Distributed Feedback Semiconductor Lasers Based on Periodic Anodes Defined by I-Line Lithography

High-power operation and lateral divergence angle reduction of broad-area laser diodes at 976 nm

High-brightness 975-Nm Surface-Emitting Distributed Feedback Laser and Arrays

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

980Nm InGaAs/AlGaAs Quantum Well High Power Semiconductor Laser with Narrow Vertical Divergence Angle

Tunable, High Beam Quality and Narrow Linewidth Semiconductor Disk Laser

Diode-Pumped High Efficient Tm : Ylf Laser Output At 1908 Nm With Near-Diffraction Limited Beam Quality

16.4 W Laser Output at 1.34 Μm with Twin Nd:YVO4 Crystals and Double-End-pumping Structure

High brightness edge-emitting laser diode with wavelength self-organization in ultra-broad emitting area

Diode both ends pumped two crystals Tm:YLF laser

High-power 940 nm DFB laser diode with large optical cavity

Fabrication and properties of domestic long tapered ytterbium-doped fiber with high tapering ratio

880 Nm Semiconductor Laser Diode Arrays and Fiber Coupling Module

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

Diode-End-Pumped Narrow-Linewidth Tm:YLF Laser with a Volume Bragg Grating and Double Fabry–Pérot Etalons