Abstract:Semiconductor laser is one of the most critical components in the field of modern communication. Research and development of single-mode semiconductor laser with high stability, high power, high beam quality and narrow line width is an important research area in this field. In this paper, A novel edge-emitting semiconductor laser diode structure is proposed. In the structure an active multimode interference waveguide structure serves as a main gain region. To modulate the longitudinal mode of the laser, a gain-coupled distributed feedback(DFB) laser based on high order surface gain coupled grating is introduced into the structure as well. The novel structure is then fabricated and compared with an conventional DFB laser. The experimental results show that higher slope efficiency and output power are achieved with the proposed structure than those with the conventional distributed feedback semiconductor lasers. The novel structure is also compared with conventional MMI laser with only Fabry-Parot(FP) cavity. The result shows that the proposed structure has higher beam quality and better stability than the FP cavity multimode interference waveguide lasers. To enhance the gain contrast in the quantum wells without introducing the effective index-coupled effect, the groove length and depth are well designed. Our device provides a single longitudinal mode with the maximum CW output power up to 53.8 mW/facet at 981.21 nm and 400 mA without facet coating, 3 dB linewidth < 13.6 pm, and SMSR > 32 dB. Optical bistable characteristic is observed with a threshold current difference. Meanwhile, by using high-order distribution feedback grating formed by shallow surface etching in the process of chip design and fabrication, the proposed structure of laser diode can realize regrowth freely and only micronscale precision i-line lithography is required. Such a structure with simple fabrication process and low manufacturing cost has great potential for commercial mass production.

996 Nm High-Power Single-Longitudinal-mode Tapered Gain-Coupled Distributed Feedback Laser Diodes.

990 Nm High-Power High-Beam-Quality DFB Laser with Narrow Linewidth Controlled by Gain-Coupled Effect

High-power Single-Longitudinal-mode Double-Tapered Gain-Coupled Distributed Feedback Semiconductor Lasers Based on Periodic Anodes Defined by I-Line Lithography

High-Brightness 850 Nm Tapered Laser Diodes

1045 nm purely gain coupled semiconductor laser based on periodic electric injection

High-power operation and lateral divergence angle reduction of broad-area laser diodes at 976 nm

Narrow-Strip 670 Nm Gain-Coupled Distributed Feedback Laser Based on Periodic Anodes Fabricated by I-Line Lithography

A 795 Nm Gain Coupled Distributed Feedback Semiconductor Laser Based on Tilted Waveguides

Investigation of the gain match in high brightness 980 nm tapered diode laser

Two-Segment Gain-Coupled Distributed Feedback Laser

Narrow-Strip Single-Longitudinal-Mode Laser Based on Periodic Anodes Defined by i-Line Lithography

980Nm InGaAs/AlGaAs Quantum Well High Power Semiconductor Laser with Narrow Vertical Divergence Angle

16.4 W Laser Output at 1.34 Μm with Twin Nd:YVO4 Crystals and Double-End-pumping Structure

Double-Junction Cascaded GaAs-Based Broad-Area Diode Lasers with 132W Continuous Wave Output Power

Design of a Multimode Interference Waveguide Semiconductor Laser Combining Gain Coupled Distributed Feedback Grating

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Study of Gain-Coupled Distributed Feedback Laser Based on High Order Surface Gain-Coupled Gratings

Gain-coupled 770 Nm DFB Semiconductor Laser Based on Surface Grating

Optical and RIN Spectrum Improvements in Necked Waveguide High-Power DFB Laser Diode

Diodes-double-end-pumped high efficiency continuous wave 36 W TEM 00 mode Nd:GdVO 4 laser