Abstract:Abstract High-precision detection of electric charge is critical for physical, chemical, and biological measurements. Nanophotonic optomechanical system confines the optical field at the nanoscale and enables a strong interaction between optical cavity and mechanical resonator. Its high optical quality factor cavity and strong optomechanical coupling are promising for precision sensing applications. Here an integrated optomechanical electrometer is proposed for the electric charge sensing using a zipper cavity with a suspended photonic crystal nanobeam (PCN) acting as a movable mechanical resonator. As the electrostatic force arising from the electric voltage to be measured interacts with the mechanical motion of the movable PCN and modulates its resonance through electrostatic stiffening effect, optomechanical coupling transduces the mechanical motion to the optical field with enhanced sensitivity. The resonance shift of the mechanical resonator can be monitored to detect the electric voltage with a sensitivity of 0.007 Hz / m V 2 $\mathrm{Hz}/\mathrm{m}{\mathrm{V}}^{2}$ . Moreover, the sensing performance can be further enhanced with the operation of the optomechanical electrometer in the self-sustained oscillation above threshold power. Owing to the narrow-linewidth of detector radio frequency (RF) spectrum with a large peak-to-noise floor ratio (up to 73.5 dB), the enhanced electrical sensitivity of 0.014 Hz / m V 2 $\mathrm{Hz}/\mathrm{m}{\mathrm{V}}^{2}$ is achieved with a high resolution of 1.37 m V 2 H z − 1 / 2 $1.37\,\mathrm{m}{\mathrm{V}}^{2}\mathrm{H}{\mathrm{z}}^{-1/2}$ . A theoretical minimal detectable electrostatic charge is calculated as 1.33 × 10 − 2 eH z − 1 / 2 $1.33{\times}{10}^{-2}\,\mathrm{eH}{\mathrm{z}}^{-1/2}$ by converting the measured electric voltage versus RF shift to an approximatively linear relationship. This on-chip optomechanical electrometry scheme provides a powerful solution to the ultrasensitive determination of charged nanoparticles in biological and chemical applications.

Mass Sensing Based on a Circuit Cavity Electromechanical System

Mass Spectrometry Based on A Coupled Cooper-Pair Box and Nanomechanical Resonator System

Ultrasensitive nanomechanical mass sensor using hybrid opto-electromechanical systems.

A Self-Sustained Mass Sensor with Physical Closed Loop Based on Thermal-Piezoresistive Coupled Resonators

A HIGH-RESOLUTION MASS SENSOR BASED ON TWO THERMAL PIEZORESISTIVE SELF-SUSTAINED RESONATORS COUPLED VIA AN ARCHING MEMBRANE

A Thermal-Piezoresistive Self-Sustained Resonant Mass Sensor with High-Q (>95k) in Air

Optical Mass Sensing with Coupled Nanomechanical Resonator Systems

Towards a Hybrid Mass Sensing System by Combining a QCM Mass Sensor With a 3-DOF Mode Localized Coupled Resonator Stiffness Sensor

A Mass Sensing Technology Based on a Dynamic Microcantilever in Liquid

Ultrasensitive nanoelectromechanical mass detection

Single-Layer MoS2 Mechanical Resonant Piezo-Sensors with High Mass Sensitivity

Nonuniform Mass Detection Using Magnetostrictive Biosensors Operating under Multiple Harmonic Resonance Modes

A Novel Qcm Mass Sensing System Incorporated with A 3-Dof Mode Localized Coupled Resonator Stiffness Sensor

Micromanipulation transfer of membrane resonators for circuit optomechanics

Ultrasensitive nanoscale optomechanical electrometer using photonic crystal cavities

Multi-channel Mass Sensing Based on Multiple Internal Resonances in Three Electrostatically Coupled Resonators

On-Chip Photonic Transistor Device and Biomolecule Mass Sensor Based on a Whispering Gallery Mode Cavity Optomechanical System

A Chip-scale Magnetic Field Sensor Based on Frequency Readout Cavity Optomechanical System

The effect of a distributed mass loading on the frequency response of a MEMS mesh resonator

A microelectromechanically controlled cavity optomechanical sensing system

Phonon Lasing Enhanced Mass Sensor with Zeptogram Resolution under Ambient Conditions