Abstract:Silicon-organic solar cells based on conjugated polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on n type silicon (n-Si) attract wide interest because of their potential for cost-effectiveness and high-efficiency. However, a lower barrier height Phi(b) and a shallow built in potential (V-bi) of Schottky junction between n-Si and PEDOT:PSS hinders the power conversion efficiency (PCE) in comparison with those of traditional p-n junction. Here, a strong inversion layer was formed on n Si surface by inserting a layer of 1, 4, 5, 8, 9, 11-hexaazatriphenylene hexacarbonitrile (HAT-CN), resulting in a quasi p-n junction. External quantum efficiency spectra, capacitance-voltage, transient photovoltage decay and minority charge carriers life mapping measurements indicated that a quasi p-n junction was built due to the strong inversion effect, resulting in a high Phi(b) and V-bi. The quasi p-n junction located on the front surface region of silicon substrates improved the short wavelength light conversion into photocurrent. In addition, a derivative perylene diimide (PDIN) layer between rear side of silicon and aluminum cathodes was used to block the holes from flowing to cathodes. As a result, the device with PDIN layer also improved photoresponse at longer wavelength. A champion PCE of 14.14% was achieved for the nanostructured silicon-organic device by combining HAT-CN and PDIN layers. The low temperature and simple device structure with quasi p-n junction promises cost-effective high performance photovoltaic techniques.

Encapsulated Carbon Nanotube-Oxide-silicon Solar Cells with Stable 10% Efficiency

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Strong and Reversible Modulation of Carbon Nanotube-Silicon Heterojunction Solar Cells by an Interfacial Oxide Layer.

High-efficiency CNT-Si Solar Cells Based on a Collaborative System Enabled by Oxide Penetration

TiO 2 -Coated Carbon Nanotube-Silicon Solar Cells with Efficiency of 15%

Stable Organic Passivated Carbon Nanotube–Silicon Solar Cells with an Efficiency of 22%

CuI-Si Heterojunction Solar Cells with Carbon Nanotube Films As Flexible Top-Contact Electrodes

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Achieving High Efficiency Silicon-Carbon Nanotube Heterojunction Solar Cells by Acid Doping.

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

Carbon Nanotube–silicon Hybrid Solar Cells with Hydrogen Peroxide Doping

Fabrication of TiO 2 nanorod array/semiconductor nanocrystal hybrid structure for photovoltaic applications

Fabrication of single-walled carbon nanotube/Si heterojunction solar cell with high photovoltaic conversion efficiency and stability

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Performance Improvement Of Assembled Multi-Walled Carbon Nanotube Network/Si Solar Cells Decorated With Metal Nanoparticles

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Efficient Energy Conversion of Nanotube/nanowire-Based Solar Cells.

Carbon Nanotube Films by Filtration for Nanotube-Silicon Heterojunction Solar Cells

High Efficiency Organic/Silicon-Nanowire Hybrid Solar Cells: Significance of Strong Inversion Layer