Abstract:The flexible TiC/carbon nanofiber (TiC/C NF) film was prepared by electrospinning, stabilization, and carbonization. All the obtained TiC/CNFs had rough surface and random orientation, and the TiC nanoparticles (NPs) were uniformly dispersed on the CNFs. With the increase of TiC NPs, the flexural property of TiC/CNF film increased. While, the electrical conductivity increased, reaching a largest value before decreasing as the amount of TiC NPs increases. These highly flexible films showed promising electrical conductivity and electrocatalytic activity. Hence, they were employed as counter electrodes (CEs) for flexible dye-sensitized solar cells (FDSSCs). After the optimization of the amount of TiC NPs in CNFs (when the Tip content in precursor was 12 wt%), a high conversion efficiency of 3.80% was obtained. This is due to its optimum electrical conductivity and catalytic active sites. Based on the optimum amount of TiC NPs, the mesopores TiC/CNF composite films were fabricated by the introduction of various amount of polymethyl methacrylate (PMMA) in an electrospun solution. With the ratio of PMMA/(PAN/PVP) increasing, the specific surface area and the electrical conductivity increased, reached the largest values corresponding to 1:1, and then decreased. The increased surface area and conductivity facilitated the diffusion of electrolyte and reduction of triiodide, resulting in the improvement of the properties of CEs. When the FDSSCs were assembled with mesoporous TiC/CNF films as CEs, the conversion efficiency can be further enhanced up to 4.47%, which can be even comparable to the Pt/FTO CE. Graphical abstract ᅟ

CuI-Si Heterojunction Solar Cells with Carbon Nanotube Films As Flexible Top-Contact Electrodes

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Flexible Carbon Nanotube/mono-Crystalline Si Thin-Film Solar Cells

Flexible carbon nanotube/mono-crystalline Si thin-film solar cells.

Rational design of an ITO/CuS nanosheet network composite film as a counter electrode for flexible dye sensitized solar cells

Flexible CuS nanotubes-ITO film Schottky junction solar cells with enhanced light harvesting by using an Ag mirror

Highly Flexible, Transparent and Conducting CuS-nanosheet Networks for Flexible Quantum-Dot Solar Cells.

Flexible Carbon Nanotubes/tio2/c Nanofibrous Film As Counter Electrode of Flexible Quasi-Solid Dye-Sensitized Solar Cells

A novel fabrication of a well distributed and aligned carbon nanotube film electrode for dye-sensitized solar cells

Transparent conducting oxide-free and Pt-free flexible dye-sensitized solar cells employing CuS-nanosheet networks as counter electrodes

Controllable and Large-Scale Fabrication of Rectangular CuS Network Films for Indium Tin Oxide-and Pt-free Flexible Dye-Sensitized Solar Cells

Performance Improvement Of Assembled Multi-Walled Carbon Nanotube Network/Si Solar Cells Decorated With Metal Nanoparticles

Large-area and High-Efficiency Carbon Nanotube/silicon Heterojunction Solar Cells Enabled by Self-Similar Fiber Electrodes and Solid-State Gel Electrolytes

Flexible, Stable, and Efficient Counter Electrode for Quantum-Dot-Sensitized Solar Cells Based on Carbon Nanotube Films

Highly catalytic carbon nanotube/Pt nanohybrid-based transparent counter electrode for efficient dye-sensitized solar cells.

TiO 2 -Coated Carbon Nanotube-Silicon Solar Cells with Efficiency of 15%

Copper Nanowire-Tio2-polyacrylate Composite Electrodes with High Conductivity and Smoothness for Flexible Polymer Solar Cells

Penetrated and aligned carbon nanotubes for counter electrodes of highly efficient dye-sensitized solar cells

The preparation of highly flexible mesoporous TiC/CNF film for flexible dye-sensitized solar cells

Laminated carbon nanotube networks for metal electrode-free efficient perovskite solar cells.

A CRYSTALLINE Si SOLAR CELL USING A CARBON NANOTUBE THIN FILM AS THE BACK ELECTRODE