Abstract:This study presents a fabrication strategy for 3D carbon microstructures using via two-photon vat photopolymerization (2p-VPP) and susceptor-assisted microwave pyrolysis (SMWP). Fabricating carbon-based electrode materials with miniaturized functional structures is pivotal for developing high-performance electrochemical microdevices. However, efficiently producing these structures in the submicron regime with desired materials is still challenging. To address this, a hybrid microfabrication strategy was developed, and 3D carbon-based microstructures with submicron resolution were successfully produced. A carbon nanotube nanocomposite photoresist (SCNT-PR1) with improved dispersibility was first prepared. After a comprehensive printability assessment, 3D microstructures with a resolution of 833 ± 54 nm were produced using 2p-VPP. Through SMWP, the microstructures were transformed into pyrolytic carbon (PyC) nanocomposite microstructures with retained geometrical features. SMWP was shown to produce PyC with a less disordered carbon atomic structure, thanks to the accelerated pyrolysis reaction under MW irradiation, when compared to pyrolysis using a conventional furnace. The resistivity was reduced by over 75% from 0.69 ± 0.13 Ω cm to 0.16 ± 0.01 Ω cm, and enhanced electrochemical performance was confirmed. The fabricated PyC nanocomposite showed a further 12% reduction in electrical resistivity and a 20% lower charge transfer resistance for the redox reaction when using SCNT-PR1 as the precursor. Overall, this hybrid fabrication strategy demonstrates the advantages of producing 3D carbon microstructures with precise control over the geometric features and enhancing electrical and electrochemical properties compared to the conventional pyrolysis method. Its potential could be extended to the fabrication of miniaturized electrochemical devices, including microelectronics and point-of-care devices.

Carbon Nanotube Integrated 3-Dimensional Carbon Microelectrode Array by Modified SU-8 Photoresist Photolithography and Pyrolysis

Carbonization-assisted Integration of Silica Nanowires to Photoresist-Derived Three-Dimensional Carbon Microelectrode Arrays

A Novel Approach to Fabricate Three-Dimensional Carbon-Based Interconnect for Micro/nano Optoelectronic Integration

Fabrication of predesigned 3D carbon based microstructures via two-photon vat photopolymerization and susceptor-assisted microwave post-processing

An Optimized Process for Fabrication of High-Aspect-Ratio Photoresist-Derived Carbon Microelectrode Array on Silicon Substrate

A novel approach to fabricate 3-dimensional carbon-based interconnect for micro/nano optoelectronic integration

Stress-Driven and Carbon-Assisted Growth of $ \hbox{sio}_{x}\hbox{n}_{y}$ Nanowires on Photoresist-Derived Carbon Microelectrode

Nanoimprint Lithography for Next-Generation Carbon Nanotube-Based Devices

Using Nanoscale Thermocapillary Flows to Create Arrays of Purely Semiconducting Single-Walled Carbon Nanotubes

Pyrolyzed Carbon with Embedded Nio/Ni Nanospheres for Applications in Microelectrodes

A Novel Experimental Approach to Compatible Carbon Nanofiber Diffusion Around Circular Carbon Micro-Post Surfaces

Aligned/Micropatterned Carbon Nanotube Arrays: Surface Functionalization and Electrochemical Sensing

Integration of Mno2 Thin Film and Carbon Nanotubes to Three-Dimensional Carbon Microelectrodes for Electrochemical Microcapacitors

Direct Growth of Carbon Nanofibers to Generate A 3d Porous Platform on A Metal Contact to Enable an Oxygen Reduction Reaction

Fabrication of CNT-carbon composite microstructures using Si micromolding and pyrolysis

Development of Microsturcture Based on Single-Wall Carbon Nanotube.

Carbon Microstructure with High Aspect Ratio Fabricated by Novel Method of Photolithography and Pyrolysis

Integration of Carbon Nanotubes to Three-Dimensional C-Mems for Glucose Sensors

Fabrication of A 3d Micro/Nano Dual-Scale Carbon Array and Its Demonstration As the Microelectrodes for Supercapacitors

A General Strategy for In-Situ Fabrication of Uniform Carbon Nanotubes on Three-Dimensional Carbon Architectures for Electrochemical Application

Fabrication of Carbon Nanotube Arrays for Field Emission and Sensor Devices by Nanoimprint Lithography