Abstract:La2Zr2O7 (LZO) buffer layers were deposited on bi-axially textured Ni–W substrates with CeO2 seed layer by radio-frequency magnetron sputtering for the large-scale application of YBa2Cu3O7−x (YBCO) coated conductors. The microstructure and surface morphology of LZO buffer layers were studied by X-ray diffraction, optical microscopy, field emission scanning electron microscopy and atomic force microscopy. The influences of substrate temperature and oxygen partial pressure on the microstructure and surface morphology of LZO buffer layers were discussed. It was found that epitaxial LZO films were preferentially c-axis oriented without microcracks, with no degradation of crystallographic texture and with high surface crystallinity. Crack-free and strong c-axis aligned LZO films with no random orientation were obtained at relatively low substrate temperatures of 600–800°C and in flowing 40Pa gas mixtures of Ar–O2 with an effective oxygen partial pressure of 0.1–20Pa. In addition, LZO films grown in low oxygen partial pressure have a smoother surface than films in higher oxygen partial pressure. Then, we fabricated YBCO coated conductors on the high-quality LZO buffer layers by pulsed laser deposition. The critical current density Jc=2.25MA/cm2 and critical current Ic=180A/cm of 0.8-μm-thick YBCO film at 77K, self field were obtained. The magnetic field and angular dependences of critical current per width were discussed. Highly textured LZO films grown on CeO2 seed layer were suitable as a buffer layer for the growth of YBCO coated conductors with high currents.

Influence of O2 Pressure on the Structure and Surface Morphology of YSZ Layer for YBCO Coated Conductor Deposited by PLD on Ni-W Tape

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Effects of YSZ Buffer Layer Surface Morphology on Superconducting Performance of YBCO Films Deposited by Pulsed Laser Deposition on NiW Tapes

Epitaxial growth of YSZ buffer layer for YBa2Cu3O7-δ coated conductor by reel to reel pulsed laser deposition

Improvement of Surface Morphology of Yttrium-Stabilized Zirconia Films Deposited by Pulsed Laser Deposition on Rolling Assisted Biaxially Textured Substrate Tapes

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

The influences of rapid growth of yttria-stabilized ZrO_2 buffer layers for YBCO coated conductors

Texture and Morphology Developments of Yttria-stabilized Zirconia (YSZ) Buffer Layer for Coated Conductors by RF Sputtering

Characterisation of YSZ Layers Deposited on Y2O3 Buffered Textured Tapes for Coated Conductors

Morphology Evolvement of Ceo2 Cap Layer for Coated Conductors

Effect of sputtering pressure on the rapid preparation of Y2O3 seed layer

Surface Morphology Evolution of CeO2/YSZ (001) Buffer Layers Fabricated Via Magnetron Sputtering

Preparation and Characterization of Ceo2/Ysz/Ceo2 Buffer Layers for Ybco Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Microstructure Analysis of High-Quality Buffer Layers on Textured Niw Tapes for Ybco Coated Conductors

Effect of Oxygen Pressure on Structure and Properties of Bi1.5Zn1.0Nb1.5O7 Pyrochlore Thin Films Prepared by Pulsed Laser Deposition

Rapid Deposition of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Surface Morphology of Cerium Oxide Layer and Its Effect on the Performance of Superconducting Layer

Reel-To-Reel Deposition of Epitaxial Double-Sided Y2o3 Buffer Layers for Coated Conductors

Influence of Buffer Layer Surface Morphology on YBCO Critical Current Density Deposited on NiW Tapes

Fabrication and Characterization of La2Zr2O7 Films on Different Buffer Architectures for YBa2Cu3O7−δ Coated Conductors by RF Magnetron Sputtering