Abstract:This paper presents an analytical and numerical study on the heat transfer characteristics of forced convection across a microchannel heat sink. Two analytical approaches are used: the porous medium model and the fin approach. In the porous medium approach, the modified Darcy equation for the fluid and the two-equation model for heat transfer between the solid and fluid phases are employed. Firstly, the effects of channel aspect ratio (αs) and effective thermal conductivity ratio (k̃) on the overall Nusselt number of the heat sink are studied in detail. The predictions from the two approaches both show that the overall Nusselt number (Nu) increases as αs is increased and decreases with increasing k̃. However, the results also reveal that there exists significant difference between the two approaches for both the temperature distributions and overall Nusselt numbers, and the discrepancy becomes larger as either αs or k̃ is increased. It is suggested that this discrepancy can be attributed to the indispensable assumption of uniform fluid temperature in the direction normal to the coolant flow invoked in the fin approach. The effect of porosity (ε) on the thermal performance of the microchannel is subsequently examined. It is found that whereas the porous medium model predicts the existence of an optimal porosity for the microchannel heat sink, the fin approach predicts that the heat transfer capability of the heat sink increases monotonically with the porosity. The effect of turbulent heat transfer within the microchannel is next studied, and it is found that turbulent heat transfer results in a decreased optimal porosity in comparison with that for the laminar flow. A new concept of microchannel cooling in combination with microheat pipes is proposed, and the enhancement in heat transfer due to the heat pipes is estimated. Finally, two-dimensional numerical calculations are conducted for both constant heat flux and constant wall temperature conditions to check the accuracy of analytical solutions and to examine the effect of different boundary conditions on the overall heat transfer.

Characterization on the Performance of a Fractal-Shaped Microchannel Network for Microelectronic Cooling

Conjugate heat transfer in fractal-shaped microchannel network heat sink for integrated microelectronic cooling application

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Design Of A Fractal Tree-Like Microchannel Net Heat Sink For Microelectronic Cooling

Experimental Study of Ultralow Flow Resistance Fractal Microchannel Heat Sinks for Electronics Cooling

Pressure Drop and Heat Transfer in Fractal Microchannel Heat Sinks for Cooling of Electronic Chips

Conjugate Heat Transfer in Fractal Tree-Like Channels Network Heat Sink for High-Speed Motorized Spindle Cooling

An Experimental Investigation on the Thermal Efficiency of Fractal Tree-Like Microchannel Nets

Experimental Investigation of Heat Transfer Performance for a Novel Microchannel Heat Sink

Experimental Study on a Tree-Shaped Microchannel Network Heat Sink for MicrOeIectronic Cooling

Analysis of microchannel heat sinks for electronics cooling

Experimental and Numerical Study on Thermofluidic Characteristics of Microchannel Heat Sinks with Various Micro Pin–fin Arrays Arrangement Patterns

Flow and Heat Transfer Characteristics of a Fractal Microchannel Heat Sink with Three‐dimensional Fractal Tail

Simulation of fluid flow and heat transfer in microchannel cooling for LTCC electronic packages

Flow and heat transfer in comby fractal microchannel network

A study of the heat transfer characteristics of the micro-channel heat sink

Comparison of cooling performance of nanofluid flows in mini/micro-channel stacked double-layer heat sink and single-layer micro-channel heat sink

Numerical Study of Laminar Heat Transfer and Pressure Drop Characteristics in A Water-Cooled Minichannel Heat Sink

Experimental Study of Water Flow and Heat Transfer in Silicon Micro-Pin-Fin Heat Sinks

Heat Transfer and Pressure Drop in Fractal Tree-Like Microchannel Nets

Microscale Heat Transfer Enhancement Using Thermal Boundary Layer Redeveloping Concept