Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

High-fluence femtosecond laser ablation of silica glass: Effects of laser-induced pressure

Shock Induced Phenomena In High Fluence Femtosecond Laser Ablation Of Silica Glass

Generation of Multiple Stress Waves in Silica Glass in High Fluence Femtosecond Laser Ablation

Stress Waves Induced by Femtosecond Laser Pulse Ablating Silica Glass

Time-Resolved Optical Diagnosis of Intense Femtosecond Laser Ablation of Silica Glass

Femtosecond laser-shockwave induced densification in fused silica

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Laser-induced stress by multi-beam femtosecond pulses in fused silica

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Experimental Study on 800 Nm Femtosecond Laser Ablation of Fused Silica in Air and Vacuum

Theoretical and experimental investigations in thermo-mechanical properties of fused silica with pulsed CO2 laser ablation

Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica

Enhancing the Expansion of a Plasma Shockwave by Crater-Induced Laser Refocusing in Femtosecond Laser Ablation of Fused Silica

Spatiotemporal Probe into the Femtosecond Laser Processing of Fused Silica

Study on Ablation Threshold of Fused Silica by Liquid-Assisted Femtosecond Laser Processing.

Densification of silica glass induced by 0.8 and 1.5μm intense femtosecond laser pulses

Dynamics of pressure waves during femtosecond laser processing of glass

Time-resolved Dynamics of 355-Nm Laser-Irradiated Surface Damage on Fused Silica

Time-Resolved Shadowgraphic Imaging of Femtosecond Laser Ablated Micro-Holes in Silica Glass

Micro-ablation at the front and rear surfaces of a fused silica window by using a femtosecond laser pulse in air

Ultra-fast Diagnosis of Shock Waves and Plasma at Front and Rear Surfaces in the Bulk of Fused Silica Induced by an Nd:YAG Pulse Laser