Abstract:Composite bed involves an alternative technique in which a layer of micro-fibrous entrapped composite material is added at the downstream end of a conventional fixed bed to strengthen the mass transfer process. In this study, our purpose was to compare the ability of composite beds to remove volatile organic compounds (VOCs) and Freon refrigerants with conventional fixed beds and analyse the effect of relative humidity (RH) on multicomponent organic vapor adsorption on composite beds. This would be used to guide the design of composite beds and their application in air purification. A series of micro-fibrous entrapped activated carbons (MFECs) were prepared using the wet layer paper-making/sintering technologies. The 1,1,1,2-tetrafluoroethane (R134a) and C 6 H 6 breakthrough curves and times on composite beds were systemically evaluated under dry and wet conditions. Results show that under dry condition, due to the enhanced mass transfer, the R134a and C 6 H 6 breakthrough times on composite beds were longer than on fixed beds. Under wet conditions, due to the water vapor competitive adsorption and the difference in organic vapor boiling point, the composite bed prolonged the C 6 H 6 breakthrough time but weakened the R134a breakthrough time. Multicomponent competitive adsorption process (R134a/C 6 H 6 ) under wet conditions was revealed and divided into six stages including Co-adsorption, H 2 O and R134a breakthrough, R134a desorption, R134a and H 2 O adsorption equilibrium, C 6 H 6 breakthrough, and dynamic adsorption equilibrium. These findings indicated that composite beds may improve the breakthrough time of low-concentration C 6 H 6 and lengthen the service life of conventional fixed beds at any RH, thereby displaying potential for use as an application in air purification.

[Fixed-Bed Adsorption Characteristics of Chlorinated Hydrocarbon Vapors Onto Hydrophobic Hypercrosslinked Polymeric Resin].

Adsorption of trichloroethylene and benzene vapors onto hypercrosslinked polymeric resin.

ADSORPTION OF TRICHLOROETHYLENE VAPOR ONTO HYPERCROSSLINKED ADSORPTION RESIN

Characterization of Hydrophobic Hypercrosslinked Polymer As an Adsorbent for Removal of Chlorinated Volatile Organic Compounds

Effect of Pre-Adsorbed Water in Hydrophobic Polymeric Resin on Adsorption Equilibrium and Breakthrough of 1,2-Dichloroethane

Adsorption/desorption of Toluene on a Hypercrosslinked Polymeric Resin in a Highly Humid Gas Stream

Synthesis and Application of a Hydrophobic Hypercrosslinked Polymeric Resin for Removing VOCs from Humid Gas Stream

Binary Adsorption Equilibrium and Breakthrough of Toluene and Cyclohexane on Macroporous and Hypercrosslinked Polymeric Resins

Adsorption characteristics of water vapor on the hypercrosslinked polymeric adsorbent

The effect of relative humidity on multicomponent organic vapor adsorption on composite beds with micro-fibrous entrapped activated carbon

Prediction of the breakthrough curves of VOC isothermal adsorption on hypercrosslinked polymeric adsorbents in a fixed bed

Adsorption of Chloroform and Trichloroethylene in Water with A New Kind of Hypercrosslinked Resins

Adsorption Dynamics of Trichlorofluoromethane in Activated Carbon Fiber Beds.

Kinetic and Thermodynamic Studies of Toluene, Ethylbenzene, and M-Xylene Adsorption from Aqueous Solutions Onto KOH-activated Multiwalled Carbon Nanotubes.

Adsorption Characteristics of Dichloromethane-Ethyl Acetate/toluene Vapor on a Hypercrosslinked Polystyrene Adsorbent.

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber

Adsorption Kinetics of Water Vapor on Hypercrosslinked Polymeric Adsorbent and Its Comparison with Carbonaceous Adsorbents

Modelling and Prediction of Toluene Adsorption Saturation Basing on Characteristic Values of Activated Carbons

Adsorption Performance of Volatile Organic Compounds on Activated Carbon Fibers in a Fixed Bed Column

Gas Phase Trichloroethylene Removal at Low Concentration Using Activated Carbon Fiber.