Abstract:Climate change issues and acid rain episodes have triggered new research directions and the conceptualization of new preventive approaches to reduce toxic gases from entering the environment. The reduction of carbon dioxide (CO2) levels in the indoor environment are also one of the challenging human safety issues during emergency incidents and rescues; for instance, a building fire. The use of an activated carbon fiber (ACF) based mask is not only effective to filter CO2 but it is also practically easy to use during such demanding situations. Such modified adsorbents will have high adsorption volume, fast adsorption rates and good thermal, acid and alkaline resistance properties. For the emergency mode considering fires, the major task is atmospheric recovery. Thus, CO2 concentration in the post-fire smoke could be high. The smoke in the room causes suffocations and unconsciousness leading to fatal injuries. In this study, ACF was modified using copper nitrate trihydrate [Cu (NO3)2 .3H2O] by impregnation and carbonization (450°C), followed by its characterization. The modified ACF (Cu-ACF-12) showed large surface area (1147m2 g−1), high micropore volume (0.45cm3 g−1) and an average pore size of 1.57nm. CO2 removal tests were carried out in a lab scale fixed bed adsorption column using the modified ACF. The process parameters were optimized based on a Box-Behnken Design (BBD) and tested in the following ranges: gas flow rate – 150–250mlmin−1, moisture content – 0–40% and modification of the ACF impregnated with copper (Cu) – 4–12wt.%. The experimental results were statistically interpreted to elucidate the main and interaction effects. The modification of ACF showed positive effects on CO2 removal, while gas flow rate and moisture content decreased the CO2 removal. Under the optimal conditions, (gas flow rate – 150mlmin−1, moisture content – 0% and modification of the ACF – 8%), CO2 removal capacity of 2.31mmol of CO2 g−1 Cu-ACF was obtained.

Gas Phase Trichloroethylene Removal at Low Concentration Using Activated Carbon Fiber.

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber

STUDY ON THE TREATMENT OF TOLUENE CONTAMINATED GAS BY ACTIVATED CARBON FIBER

Highly Microporous Activated Carbons with Industrial Potential for Selective Adsorption of Ethane over Ethylene

The Separation of Chloromethane Mixtures and the Recovery of Dichloromethane, Chloroform and Carbon Tetrachloride by Activated Carbon Fibre

S-triazine herbicides removal by granular activated carbon

Removing Chlorobenzene via the Synergistic Effects of Adsorption and Catalytic Oxidation over Activated Carbon Fiber Loaded with Transition Metal Oxides

Adsorption of Polychlorinated Dibenzo-P-dioxins/dibenzofurans on Activated Carbon from Hexane.

Breakthrough of Methyethylketone and Benzene Vapors in Activated Carbon Fiber Beds

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Adsorption of Phenylethyl Alcohol Onto Granular Activated Carbon from Aqueous Solution: Kinetics, Equilibrium, Thermodynamics, and Dynamic Studies

Prediction of breakthrough curves for adsorption on activated carbon fibers in a fixed bed

[Fixed-Bed Adsorption Characteristics of Chlorinated Hydrocarbon Vapors Onto Hydrophobic Hypercrosslinked Polymeric Resin].

Enhanced Adsorption of Gaseous Naphthalene by Activated Carbon Fibers at Elevated Temperatures

Removal of 2,4-Dichlorophenol from Aqueous Solution by Static-Air-activated Carbon Fibers

Adsorption of trace polar methy-ethyl-ketone and non-polar benzene vapors on viscose rayon-based activated carbon fibers

Adsorption of Polychlorinated Dibenzo-p-Dioxins and Dibenzofurans Vapors on Activated Carbon

Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal

Adsorption characteristics of trace volatile organic compounds on activated carbon fibres at room temperature

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture

A new model for predicting breakthrough curves of adsorption on activated carbon fibers