Abstract:Indoor volatile organic compound (VOC) concentrations are often dynamic because the ventilation and emission rates of VOC usually change. Adsorption filters used for air purification may operate with a capacity that fluctuates with unsteady VOC concentrations in buildings. Modeling the dynamic interactions between adsorption filters and indoor air is crucial for predicting their performance under real-world conditions. This study presents a numerical model of partially reversible adsorption equilibrium coupled with a mass transfer model to create a predictive model for adsorption efficiency in environments with dynamic VOC concentrations. A honeycomb adsorption filter for benzene adsorption was simulated and tested, including the breakthrough and purging curve and the long-term efficiency in an experimental chamber with dynamic concentrations. The results reveal that the curve generated with the partially reversible adsorption equilibrium model closely aligns with the measured one. Furthermore, the model was coupled with a chamber model and the simulation results were compared with those calculated using the filter model with a single adsorption isotherm. When VOCs were emitted intermittently in the chamber and there was sufficient ventilation, the concentration peaks in the chamber derived from the models with different assumptions on adsorption reversibility were significantly different from each other. Moreover, it was observed that the reversible adsorption capacity of the filter was crucial for long-term operation in rooms with dynamic concentration. Despite the reversible adsorption capacity constituting only 6.7% of the total adsorption capacity of the tested filter, it contributes to a significant "peak shaving and valley filling" effect, even when the irreversible adsorption capacity is saturated. The adsorption reversibility should be taken as an important parameter for selecting adsorbents for dynamic concentration conditions.

Prediction of breakthrough curves for adsorption on activated carbon fibers in a fixed bed

A new model for predicting breakthrough curves of adsorption on activated carbon fibers

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Prediction of the breakthrough curves of VOC isothermal adsorption on hypercrosslinked polymeric adsorbents in a fixed bed

Modelling and Prediction of Toluene Adsorption Saturation Basing on Characteristic Values of Activated Carbons

STUDY ON THE TREATMENT OF TOLUENE CONTAMINATED GAS BY ACTIVATED CARBON FIBER

Experimental and Modeled Results Describing Adsorption of Trace VOCs Onto Oxidized ACF

Breakthrough of Methyethylketone and Benzene Vapors in Activated Carbon Fiber Beds

Evaluating isotherm models for the prediction of flue gas adsorption equilibrium and dynamics

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber

Correlations and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Activated Carbons

Adaptation of breakthrough models in a continuous-flow fixed bed column: Describing and predicting 1.1.1.2-Tetrafluoroethane breakthrough curves under high moisture content

Modification of the adsorption model for the mixture of odor compounds and VOCs on activated Carbon: Insights from pore size distribution

Adsorption equilibrium of activated carbon amid fluctuating benzene concentration in indoor environments

Gas Phase Trichloroethylene Removal at Low Concentration Using Activated Carbon Fiber.

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Experimental validation of adsorption filter model under dynamic VOC concentrations: Prediction of long-term efficiency

Exploration of the adsorption and desorption performance of volatile organic compounds by activated carbon with different shapes based on fixed-bed experiments

EXPERIMENTAL AND MODELED RESULTS DESCRIBING THE ADSORPTION OF TRACE VOCS ON ACTIVATED CARBON FIBERS

Application of an effective method in predicting breakthrough curves of fixed-bed adsorption onto resin adsorbent

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture