Abstract:Dichloromethane (DCM), a typical representative of chlorinated volatile organic compounds (CVOCs), is usually exhausted along with other volatile organic compounds (VOCs), such as toluene and ethyl acetate, in industrial factories. To address the complexity of the components, the large variation in concentration of each component and the water content of the exhaust gases emitted from the pharmaceutical and chemical industries, the adsorption characteristics of DCM, toluene (MB), and ethyl acetate (EAC) vapors on hypercrosslinked polymeric resins (NDA-88) were studied by dynamic adsorption experiments. Furthermore, the adsorption characteristics of NDA-88 for binary vapor systems of DCM-MB and DCM-EAC at different concentration ratios and the nature of the interaction force with the three VOCs were explored. NDA-88 was found to be suitable for treating binary vapor systems of DCM mixed with low concentrations of MB/EAC, and a small quantity of adsorbed MB or EAC would promote the adsorption of DCM by NDA-88, which is attributed to the microporous filling phenomenon. Finally, the influence of humidity on the adsorption performance of binary vapor systems for NDA-88 and the regeneration adsorption performance of NDA-88 were investigated. The presence of water steam shortened the penetration times of DCM, EAC, and MB, regardless of whether it was in the DCM-EAC or DCM-MB two-component systems. This study has identified a commercially available hypercrosslinked polymeric resin NDA-88, which has excellent adsorption performance and regeneration capacity for both single-component DCM gas and a binary mixture of DCM-low-concentration MB/EAC, providing experimental guidance for the treatment of emissions from pharmaceutical and chemical industries by adsorption.

Adsorption/desorption of Toluene on a Hypercrosslinked Polymeric Resin in a Highly Humid Gas Stream

Desorption of Non-Polar Organics on PDVB Resin under Microwave Radiation Cooperated with Atomized Water

Absorption and desorption of gaseous toluene by an absorbent microcapsules column.

Synthesis and Application of a Hydrophobic Hypercrosslinked Polymeric Resin for Removing VOCs from Humid Gas Stream

Novel Hydrophobic Pdvb/R-Sio2 for Adsorption of Volatile Organic Compounds from Highly Humid Gas Stream

Toluene and Water Vapor Adsorption Characteristics and Selectivity on Hydrophobic Resin-Based Activated Carbon

Hydrophobic Design of Adsorbent for VOC Removal in Humid Environment and Quick Regeneration by Microwave

Experimental and computational investigation on the organic acid modification of porous carbon for toluene adsorption under humid conditions

Adsorption characteristics of water vapor on the hypercrosslinked polymeric adsorbent

Engineering surface functional groups on mesoporous silica: towards a humidity-resistant hydrophobic adsorbent

Application of MCM-48 with Large Specific Surface Area for VOCs Elimination: Synthesis and Hydrophobic Functionalization for Highly Efficient Adsorption

A Hydrophobic and Hierarchical Porous Resin-Based Activated Carbon Modified by G-C3n4 for Toluene Capture from Humid Conditions

Adsorption Characteristics of Dichloromethane-Ethyl Acetate/toluene Vapor on a Hypercrosslinked Polystyrene Adsorbent.

The Preparation and Investigation of Ionic Functional Resins for Deep Dehydration of Toluene

Porous Materials Engineering for Aromatic VOCs Combustion & Adsorption

Hydrophobic Modified Activated Carbon Using PDMS for the Adsorption of VOCs in Humid Condition

A hydrophobic and hierarchical porous resin-based activated carbon modified by g-C 3 N 4 for toluene capture from humid conditions

Coupling of gaseous toluene adsorption and heterogeneous oxidative degradation by iron-based porous polymeric resin LXQ-10

CO2-assisted synthesis of graphitic resin-based activated carbon for ultrahigh selective adsorption of VOCs under humid conditions

Adsorption of trichloroethylene and benzene vapors onto hypercrosslinked polymeric resin.