Abstract:Currently, photocatalytic technology mostly uses powdered TiO 2 catalysts, which are not conducive to recycling, limit the contact between volatile organic compounds (VOCs) and the photocatalyst, and result in lower mass transfer efficiency in gas-solid reactions. Meanwhile, TiO 2 catalysts including the electrospun TiO 2 nanofibers with hydrophilic surfaces are not favorable for the infiltration and adsorption of non-polar VOCs. To solve these problems, in this work, the monolithic composites TiO 2 /HKUST-1/RGO@melamine foam (named MRTH) with improved surface mass transfer composed of metal-organic framework (HKUST-1), graphene oxide (GO) and electrospun TiO 2 nanofibers was designed. The metal-organic framework HKUST-1 plays a role in promoting the adsorption of toluene, while the reduced graphene oxide (RGO) facilitates the infiltration of non-polar molecules on the surface of the composite and has better electron transport capability. A type II heterojunction between the electrospun TiO 2 nanofibers and HKUST-1 formed in the monolithic composites suppresses the recombination of electron-hole pairs and extends their lifespan. Comparing with the bare electrospun TiO 2 nanofibers, the MRTH foam composites exhibit a wider light absorption range, hydrophilic and oleophobic properties and a higher separation efficiency of photogenerated carriers. In 90 min of dark adsorption, the removal rate of toluene over MRTH-8 was 52.32 %, while under irradiation by xenon lamp for 150 min, the removal rate over MRTH-8 reached 90.15 %. The amount of monolithic foam composites can also be easily adjusted in the reactor to achieve the best possible removal of the contaminant. The prepared composite materials have been characterized in detail, and the possible mechanisms have also been discussed. The foam composites prepared in this work have high catalytic activity and gas-solid reaction mass transfer efficiency, so they have wide practical application prospects in the field of VOCs abatement.

Coupling of gaseous toluene adsorption and heterogeneous oxidative degradation by iron-based porous polymeric resin LXQ-10

Gaseous toluene heterogeneous oxidative degradation by iron-based hypercrosslinked polymeric resin LXQ-10

Recent Advances in Catalysts for Toluene Elimination Via Catalytic Oxidation

Toluene Degradation by Iron-Doped TS-1 Zeolite Heterogeneous Catalyst Supported in a Bubbling Reactor

The resin-supported iron-copper bimetallic composite as highly active heterogeneous Fenton-like catalysts for degradation of gaseous toluene

Effect of ambient factors over spinel CuMn2O4 for toluene catalytic ozonation: Enhancement of the synergy and the generation of ROS

Adsorption/desorption of Toluene on a Hypercrosslinked Polymeric Resin in a Highly Humid Gas Stream

Selective solvent-free oxidation of toluene to benzaldehyde over zeolite supported iron

Wet Scrubber Coupled with Heterogeneous UV/Fenton for Enhanced VOCs Oxidation over Fe/ZSM-5 Catalyst

Robust Photocatalytic Performance of Tio2/Bi2wo6 Photocatalysts with Trace Fe Dopant for Gaseous Toluene Decomposition

Fe(II)/LXQ-10 bifunctional resin materials for boosting synergistic adsorption/oxidation of benzene in industrial waste gas

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Wet scrubber coupled with heterogeneous UV/Fenton for enhanced VOCs oxidation over Fe/ZSM-5 catalyst.

3D monolithic composites TiO 2 /HKUST-1/RGO@melamine foam with improved surface mass transfer for efficient photocatalytic degradation of toluene gas

Preparation and catalytic behaviors of iron-based V-W-Ti catalyst: A novel strategy for low-temperature denitrification and synergistic toluene removal

Preparation of tungsten–iron composite oxides and application in environmental catalysis for volatile organic compounds degradation

Porous Materials Engineering for Aromatic VOCs Combustion & Adsorption

Emission Control of Toluene in Iron Ore Sintering Using Catalytic Oxidation Technology: A Critical Review

Adsorption and desorption mechanism of toluene gas by iron modified activated carbon fiber

Combination of porous covalent triazine frameworks with spinel for highly improved photothermal catalytic oxidation of toluene

Modification of Fe on hydrophobic ZSM-5 zeolite: Optimization of adsorption and catalytic performance for decomposition of VOCs at low-temperature