Hydrophobic hypercrosslinked polymers prepared by secondary pore-forming method as excellent toluene adsorbents
Meihe Yu,Yingli Ren,Meiyan Guo,Baoyi Ren,Gang Xiong,Fu Ding,Lixin You,Yaguang Sun
DOI: https://doi.org/10.1016/j.seppur.2024.128115
IF: 8.6
2024-05-30
Separation and Purification Technology
Abstract:In this work, inspired by molecular imprinting technology, we developed a secondary pore-forming method to chemically etch three hypercrosslinked polymers which are constructed from three novel hexapolar monomers containing imine groups, resulting in three novel hydrophobic porous hyper-crosslinked polymers (HCPs) pGly-TPA , pP-TPA and pBP-TPA . The structures were determined by FT-IR and solid-state 13 C NMR spectroscopic techniques. The specific surface areas of pGly-TPA , pP-TPA and pBP-TPA are 694.1, 197.9 and 497.7 m 2 /g, respectively. All three porous polymers exhibit high hydrophobic properties with wetting angles of much greater than 90°. The breakthrough adsorption experiments revealed that the three prepared polymers exhibited significant adsorption capacity for toluene (322.05 mg/g for pGly-TPA , 114.43 mg/g for pP-TPA and 279.14 mg/g for pBP-TPA ), but showed almost no adsorption for ethyl acetate, cyclohexane, and n-hexane, exhibiting certain molecular size and polarity selectivity. The adsorption behaviors of toluene on pGly-TPA , pP-TPA and pBP-TPA can be fit by the Boltzmann model and the Yoon-Nelson model, suggesting that the fixed bed has low mass transfer resistance. The adsorption rate is controlled by both external diffusion and intraparticle diffusion, as shown by the intraparticle diffusion model analysis. In addition, the adsorption capacity of toluene on pGly-TPA is almost unchanged under high humidity (70 %) or five adsorption–desorption processes, which demonstrates exceptional water-resistance and stability. This work is a reference for preparing novel hydrophobic HCPs using the secondary pore-forming method for removing VOCs from humid air.
engineering, chemical