Abstract:Nanocrystalline barium titanate (BaTiO3, BT) was synthesized hydrothermally at 220°C by reacting barium hydroxide with titanium dioxide. The resulting BT nanopowders were characterized by X‐ray diffraction (XRD), selected area electron diffraction (SAED), Raman spectrum, scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). The BT nanopowders have a cubic phase as revealed by the XRD and SAED results, whereas the Raman spectrum indicates that tetragonal phase BT exists in the produced nanopowders but is not the dominant phase because of the weak characteristic peak of the tetragonal structure at 305 cm−1. In the SEM and TEM images, many coarse‐faceted cubic nanoparticles and a small amount of spherical particles are observed, indicating a developed bimodal size distribution of the BT powders. The variations of electron diffraction contrast across these particles in the TEM images indicate the presence of high strain in the BT nanoparticles, which is probably caused by the lattice defects like OH− ions and their compensation by cation vacancies. The HR‐TEM image of a BT nanoparticle with a size of 24 nm and a spherical morphology demonstrates a uniform and perfect crystal structure. The surrounding edges of the particle are very smooth and no surface steps are observed. However, a terrace–ledge–kink (TLK) surface structure was frequently observed at the edges of the BT nanoparticles with rough surface morphology, and in most cases the terrace and ledge lie on the {100} planes. The observed TLK surface structure can be well interpreted by the theory of periodic bond chains. Small nucleated and triangular BT islands with three to four atomic layer thickness, and their outside surfaces faceted as (100) and (010) planes, are also observed in these particles. The rarely seen {110} surface in the BT nanoparticles was found to be reconstructed so that the surface was composed of corners bound by {100} minifaces like the triangular small islands. Microstructural defects such as antiphase boundaries were also observed near the edge of a BT nanoparticle, which were formed by the intersection of two crystalline parts with displacement deviation from each other by , as revealed by the HR‐TEM images.

Tem Characterization and Raman Spectra of Hydrothermal Batio3 Nanoparticles

Hydrothermal Synthesis of Nanocrystalline BaTiO3 Particles and Structural Characterization by High-Resolution Transmission Electron Microscopy

Microstructural Characterization of BaTiO3 Ceramic Nanoparticles Synthesized by the Hydrothermal Technique

BaTiO3 Nanocrystals: Hydrothermal Synthesis and Structural Characterization

Microstructural Characterization of BaTiO<sub>3</sub> Ceramic Nanoparticles Synthesized by the Hydrothermal Technique

Atomic-scale Surface Structures and Structural Defects of Hydrothermal Batio3 Nanoparticles Revealed by HRTEM

Atomic‐Scale Characterization of Barium Titanate Powders Formed by the Hydrothermal Process

Morphology and atomic-scale surface structure of barium titanate nanocrystals formed at hydrothermal conditions

Influences of Reactive Conditions on the Formation of Hydrothermal BaTiO3 Nanocrystals and Their Atomic-Scale Surface Structures

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Synthesis of Highly Dispersed Barium Titanate Nanoparticles by a Novel Solvothermal Method

Perovskite Nanoparticles and Nanowires: Microwave–Hydrothermal Synthesis and Structural Characterization by High‐Resolution Transmission Electron Microscopy

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Morphology Evolution of BaTi5O11 Nanocrystals Prepared by Hydrothermal Method and Their Permittivity

Synthesis and Microstructure of Flower-Like Batio3 Nanostructure

Hydrothermal Synthesis and Phase-, Morphology-Evolution Mechanism of Lead Titanate Nanostructures Assisted with Tetramethylammonium Hydroxide

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Bi4Ti3O12 nanocrystals synthesized via hydrothermal reaction

Synthesis and Characterization of BaTiO3 Nanopowders Via Solvothermal Method

Structure and Properties of Barium Strontium Titanate Nanoparticles Synthesized by A Hydrothermal Method