Abstract:Superelastic and superinsulation carbon aerogels are highly promising for thermal protection under extreme conditions. This review presents a comprehensive insight into recent advances in this emerging material, focusing on fundamental heat transfer mechanisms, nanostructured engineering strategies, optimization pathways for thermal stability and thermal insulation performance, as well as current challenges and future developments. Carbon aerogels (CAs) are desirable for thermal protection in aerospace because of their lightweight and high‐temperature insulation characteristic; however, their intrinsic brittleness and flaw sensitivity easily trigger catastrophic failure when resisting high‐frequency thermal shocks or complex mechanical stresses. Compression is the predominant load applied on aerogels by aerodynamic pressure and pre‐tightening force; therefore, the structural elasticity and exceptional capability to keep thermal performance under impact stress are crucial in deciding the actual availability of aerogels. This review presents the recent progress in newly resilient CAs for thermal protection, focusing on reliable structural stability, thermal stability, and thermal superinsulation property. The influence law of microstructures on heat transfer behaviors is first investigated, followed by construction strategies for adiabatic CAs, emphasizing the recoverable deformability resulting from increased continuity of building blocks from 0D nanoparticles to 1D nanofibers/nanotubes and then to 2D nanosheets. Moreover, the optimization of thermal stability in high‐temperature aerobic environments and thermal insulation performance are discussed. Finally, it raises current challenges and further opportunities for CAs toward better properties and brighter prospects.

Ultralow Density Carbon Aerogels with Low Thermal Conductivity Up to 2000 °C

Ultrahigh-strength carbon aerogels for high temperature thermal insulation

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

Carbonaceous ceramic nanofibrous aerogels for high-temperature thermal superinsulation

Carbon-Fiber Felt Reinforced Carbon/Alumina Aerogel Composite Fabricated with High Strength and Low Thermal Conductivity

Advance in Research of High Temperature Resistant Aerogel Used as Insulation Material

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Superelastic and robust carbonaceous nanofibrous aerogel with high pressure-sensitivity, excellent thermal insulation and high photothermal-conversion efficiency

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Preparation and Characterization of C/Al 2 O 3 Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Ultralight carbon fiber felt reinforced monolithic carbon aerogel composites with excellent thermal insulation performance

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

An Unusual Carbon–Ceramic Composite with Gradients in Composition and Porosity Delivering Outstanding Thermal Protection Performance Up to 1900 °C

Synthesis of Structure Controllable Carbon Aerogel with Low Drying Shrinkage and Scalable Size As High-Temperature Thermal Insulator

Ultralight Ceramic Fiber Aerogel for High-Temperature Thermal Superinsulation

Superelastic Carbon Aerogels: An Emerging Material for Advanced Thermal Protection in Extreme Environments

Ultralight ZrB 2 /ZrC nanofiber aerogels with excellent elasticity and ultra-low thermal conductivity

Elastic ceramic aerogels for thermal superinsulation under extreme conditions

Carbon Aerogel for Insulation Applications: A Review

Ultralight and compressive SiC nanowires aerogel for high-temperature thermal insulation